{"title":"Heaters and Thermistors","description":null,"products":[{"product_id":"60w-24v-heater-cartridge-with-100cm-cable","title":"60W 24V Heater Cartridge with 100CM cable","description":"Size 6x20MM (Compatible with E3D volcano heat blocks). This is a 60W heater cartridge with a nice long cable to work with most printers on the market.","brand":"Trianglelab","offers":[{"title":"Default Title","offer_id":41131085988008,"sku":"TRI0151","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/60w-24v-heater-cartridge-with-100cm-cable-west3d-printing-trianglelab-995155.jpg?v=1691189374"},{"product_id":"pt1000-thermistor-cartridge-450c","title":"PT1000 Thermistor Cartridge (450C)","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Trianglelab Thermistor Cartridge PT1000 for E3D hotend v6 heater block supports up to 450 degrees.\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003ePT1000 sensors are able to measure higher temperatures than your typical thermistors - up to 400°C and are more accurate too. These are perfect if you are printing high temperature materials. usually these can be a direct replacement for your another thermistor without having to add a PT100 stick.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThe included resistors can be used to modify your MCU for higher accuracy, consult the documentation from your controller's manufacturer.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eHandy information:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eOperating temperature range 0-450 degrees\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eMetal cartridge dimension 3MM diameter 15MM length\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e1 meter length fiberglass High temperature resistant wire\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eRESISTANCE VALUE CHART PER 1C PT1000:\u003c\/span\u003e\u003ca target=\"_self\"\u003e\u003cspan\u003ehttp:\/\/www.hayashidenko.co.jp\/en\/info14.html\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eWhat do you get?\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e1 x PT1000 seneor with sealed with metal cartridge\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e3 x 1K 0.1% SMD Resistors 0603 package\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e1 x 2P 2.54MM Terminal wire\u003c\/span\u003e\u003c\/div\u003e","brand":"Trianglelab","offers":[{"title":"Default Title","offer_id":41131249959080,"sku":"TRI0156","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/pt1000-thermistor-cartridge-450c-west3d-printing-trianglelab-974643.jpg?v=1691189686"},{"product_id":"industrial-heater-50w-24v","title":"Slice Industrial Heater - 50W 24V","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis is an industrial heater, rated for high operating temperatures and designed for continuous operation in an enclosed heated chamber. State of the art, robust construction with internally connected terminal pins inside the cartridge provide for the ultimate in safety and reliability. Leads are thin with PTFE infused insulation for maximum flexibility during installation and printer operation. Fiberglass shielding on the first 100 mm of the leads provides optimal heat protection. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpecs\u003c\/span\u003e\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e50 Watts of heating power - go big or go home\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e24 Volts\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e321 stainless steel cartridge for increased durability and longevity\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e22 mm cartridge length \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e6 mm cartridge diameter\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExtra long 2 m leads reach across even the largest printer\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRated for continuous operation in a 250 °C actively heated environment\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Slice Engineering","offers":[{"title":"Default Title","offer_id":41141359804584,"sku":"SLI0204","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/industrial-heater-50w-24v-west3d-printing-slice-engineering-600001.jpg?v=1691189615"},{"product_id":"pt1000-resistance-temperature-detector-rtd","title":"Pt1000 Resistance Temperature Detector (RTD) Thermistor","description":"\u003ch3 data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eProduct Description:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePt1000 Resistance Temperature Detector (RTD) uses a \u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eplatinum\u003c\/em\u003e\u003c\/strong\u003e resistor for the ultimate in temperature sensing performance. Works with Duet 3 and other high amperage boards out of the box. Perfect for any Pt1000-compatible 3D printers.\u003cspan data-mce-fragment=\"1\"\u003e  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eUse in conjunction with\u003c\/strong\u003e \u003cstrong\u003eBoron Nitride Paste for the highest accuracy results.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePrimary benefits:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAccurate from freeze-your-butt-off cold (-50 °C) to instantly-boil-your-innards hot (500 °C)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTotally linear temperature response improves sensing accuracy across the range\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eVirtually eliminates lead measurement error inherent in Pt100 sensors\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHighly accurate, IEC 60751 Class B tolerance (+\/- 0.3 +0.005 |t| °C)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2 m long bare leads allow for easy adaptation to any 3D printer build\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e300 series stainless steel cartridge to boost durability\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRobust, thin-film construction sensor\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e100% Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Slice Engineering","offers":[{"title":"Default Title","offer_id":41141374255272,"sku":"SLI0205","price":29.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/pt1000-resistance-temperature-detector-rtd-thermistor-west3d-printing-slice-engineering-140937.jpg?v=1691189686"},{"product_id":"thermistor-high-temperature-300c","title":"Thermistor High Temperature - 300C \/ 450C","description":"\u003ch3\u003e\u003cspan\u003eProduct Description:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cstrong\u003e300°C Thermistor\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e- Accurate from room temperature up to 300°C\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Robust construction \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Compatible with most 3D printer firmware, including Marlin and Duet* \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Perfect for expanding a 3D printer's material capabilities to the limits of open-air machines \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e450°C Thermistor\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Designed to weather the fiercest heat - accurately measures up to 450°C \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Robust construction \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Compatible with most 3D printer firmware, including Marlin and Duet* \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- The only high-temperature 3D printing thermistor for high performance polymers like PEEK and PEI (Ultem) \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e*NOTE: Installation of a new thermistor will require selecting the correct sensor in your firmware settings. Some printers may require an update of the \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/1904x5JK-Sup-cX5DqHiiZWaFVTK6_PQBFxgi_6yXEJw\/edit#gid=0\" target=\"_blank\" aria-describedby=\"a11y-new-window-external-message\" rel=\"noopener noreferrer\"\u003eRT table\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e in the printer firmware, especially for the 450°C Thermistor. Not all 3D printers allow firmware updates. Please check to ensure your printer will allow firmware updates, \u003c\/span\u003e\u003cspan\u003eotherwise the thermistor will not work\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe 450°C Thermistor should not be used with printers that use a RAMBo Mini V1.3a or any older version of this board. Common printers with this board include the Prusa MK2.5s, the Prusa MK2.5, the Prusa MK2s, and the Prusa MK2.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003ePrimary benefits:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEliminates the need for high temperature RTD's or having two separate thermistors to maintain accuracy at both the low and high end of the temperature spectrum\u003c\/li\u003e\n\u003cli\u003eThese are simply the highest performing thermistors on the market\u003c\/li\u003e\n\u003cli\u003e15 mm long. 3 mm diameter, the de facto standard for sleeved thermistors\u003c\/li\u003e\n\u003cli\u003eEach thermistor is attached to 2 meter bare leads making it easy to install on virtually any printer.\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e*NOTE: Installation of a new thermistor will require selecting the correct sensor in your firmware settings. Some printers may require an update of the \u003c\/strong\u003e\u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/1904x5JK-Sup-cX5DqHiiZWaFVTK6_PQBFxgi_6yXEJw\/edit#gid=0\"\u003e\u003cspan\u003e\u003cstrong\u003eRT table\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e\u003cstrong\u003e in the printer firmware. Not all 3D printers allow firmware updates. Please check to ensure your printer will allow firmware updates, \u003cu\u003eotherwise the thermistor will not work\u003c\/u\u003e.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Slice Engineering","offers":[{"title":"300C","offer_id":41141450801320,"sku":"SLI0209","price":28.99,"currency_code":"USD","in_stock":true},{"title":"450C","offer_id":42586222035156,"sku":"SLI0210","price":28.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/thermistor-high-temperature-300c-450c-west3d-printing-slice-engineering-320625.jpg?v=1691189695"},{"product_id":"keenovo-silicone-heater-heating-pad","title":"Keenovo Silicone Heater \/ Heating Pad","description":"\u003cp\u003eWant an alternative? \u003cstrong\u003e\u003ca href=\"https:\/\/west3d.com\/products\/universal-120v-silicone-heater-edge-to-edge-heaters-with-thermal-switch-protection?_pos=7\u0026amp;_sid=e4ddbe6cc\u0026amp;_ss=r\"\u003eCheck out our new Edge to Edge heaters with Thermal Protection.\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhen it comes to the main components of your printer, you don't want to skimp on a no-name product with unverified quality and reliability. This is why we went directly to the source to bring you an assortment of heater pads from Keenovo.\u003c\/p\u003e\n\u003cp\u003eIf you're looking for the \"Fermio\" style pads for Voron builds, go to our Fermio product page: \u003ca href=\"https:\/\/west3d.com\/products\/keenovo-fermio-style-silicone-heater-heating-pad\" title=\"Keenovo Fermio Style Heater Pad\"\u003eLINK\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFor the pads listed on this page, the 300mm version includes a 150C built-in thermostat from Keenovo.\u003c\/p\u003e\n\u003cp\u003eWe carry multiple sizes. Generally, you want a heater pad pad that is a little smaller than your build plate. For instance:\u003c\/p\u003e\n\u003cp\u003eIf you have a:\u003c\/p\u003e\n\u003cp\u003e350mm build plate go with a 300mm pad\u003c\/p\u003e\n\u003cp\u003e300mm build plate go with a 240mm pad\u003c\/p\u003e\n\u003cp\u003e250mm build plate go with a 200mm pad\u003c\/p\u003e\n\u003cp\u003e120mm build plate go with a 100mm pad\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlease review excerpt from Keenovo's Product Page:\u003c\/p\u003e\n\u003ch2\u003eDESCRIPTION:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWonderful silicone heater for your 3D printer build plate heating upgrade.\u003c\/li\u003e\n\u003cli\u003ePlease choose the suitable version for your printer. For \u003cstrong\u003eVORON\u003c\/strong\u003e, please check our popular pads of 100mm x 100mm, 200mm x 200mm, 240mm x 240mm\/250mm x 250mm, 300mm x 300mm for \u003cstrong\u003eVORON\u003c\/strong\u003e V0 120, V1\/V2 250, V1\/V2 300, V1\/V2 350 respectively.\u003c\/li\u003e\n\u003cli\u003eAll pads come with 3M adhesive backing for excellent and easy mounting.\u003c\/li\u003e\n\u003cli\u003eA free NTC 100K thermistor ( Beta 25\/50 3950K-1%, Click \u003ca title=\"NTC-Thermistor-R-T-Table\" href=\"https:\/\/www.keenovo.com\/NTC-Thermistor-R-T-Table.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eHere\u003c\/a\u003e for the R-T datasheet) is included except for those specified otherwise (such as K type thermocouple or PT100-we use HAYASHI A class PT100). Choose type 11 or 13 in Marlin firmware for the thermistor.\u003c\/li\u003e\n\u003cli\u003eVersatile and may be used in many other applications.\u003c\/li\u003e\n\u003cli\u003eKeenovo carries a full range of standard and custom designed silicone heaters, contact us if you need a special heater made.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIMPORTANT NOTES:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeaters may get super hot. Please handle with care.\u003c\/li\u003e\n\u003cli\u003eRed wires are the Thermistor sensor extenstion wires, white wires are for voltage supply to the heating element.\u003c\/li\u003e\n\u003cli\u003eA supporting frame\/layer is strongly suggested to have the heating element \"sandwiched\" tightly for better heating result. Please kindly check this post about a \u003cstrong\u003e\u003ca title=\"How to achieve a perfect installation of a Keenovo heater pad to your 3D printer's build plate\" href=\"https:\/\/keenovo.store\/blogs\/how-to\/how-to-achieve-a-perfect-installation-of-a-keenovo-heater-pad-to-your-3d-printers-build-plate\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ePerfect Installation\u003c\/a\u003e\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eIf your heater does not come with a Keenovo Digital controller, you may want to wire it via an SSR, please kindly check this post on \u003cstrong\u003e\u003ca title=\"How to wire a Keenovo heater pad to your 3D printer via an SSR\" href=\"https:\/\/keenovo.store\/blogs\/how-to\/how-to-wire-a-keenovo-heater-pad-to-your-3d-printer-via-an-ssr\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eSSR Wiring\u003c\/a\u003e\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eIf your heater comes with Keenovo Digital Controller, please read the Controller Configuration Manual, especially the \"Advanced Setting\" part, carefully BEFORE making any changes on the controller.\u003c\/li\u003e\n\u003cli\u003eThe controller unit is 100% brand new. Yet due to manufacturing reasons, stains, dusts or scratches may be present on the silicone case. It may also fit less tight as shown in the picture. Please consider this before the purchase.\u003c\/li\u003e\n\u003cli\u003eIf your heater comes with a built-in thermostat, please kindly note that the thermostat, being mechanical (bi-metal and snap action), should not be considered as a precise temperature control device, but as an auto-regulating and over-heating protection device. Its action temperatures may be subjected to certain tolerances or hysteresis due to factors such as heater power rating, ambient temperatures and heat consumption\/loss rate etc.\u003c\/li\u003e\n\u003cli\u003eAs we receive customer feedback, we do make small alterations to our products if we feel they improve the their performance and stability. The item(s) you receive might reflect some of these slight changes and improvements.\u003c\/li\u003e\n\u003cli\u003eDo not cut the heater.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Keenovo","offers":[{"title":"100x100 60W 24V","offer_id":41219722313896,"sku":"KEE0285","price":27.99,"currency_code":"USD","in_stock":true},{"title":"200x200 500W 110V","offer_id":41219722346664,"sku":"KEE0286","price":44.99,"currency_code":"USD","in_stock":true},{"title":"200x200 200W 110V","offer_id":43650934833364,"sku":"KEE0289","price":39.99,"currency_code":"USD","in_stock":true},{"title":"240x240 600W 120V","offer_id":41219722379432,"sku":"KEE0287","price":55.99,"currency_code":"USD","in_stock":true},{"title":"300x300 750W 120v + 150C Built-in Thermostat","offer_id":41219722412200,"sku":"KEE0288","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/keenovo-silicone-heater-heating-pad-west3d-printing-keenovo-446314.jpg?v=1691189618"},{"product_id":"keenovo-fermio-style-silicone-heater-heating-pad","title":"Keenovo Fermio Style Silicone Heater \/ Heating Pad","description":"\u003cp\u003eWant an alternative? \u003ca href=\"https:\/\/west3d.com\/products\/universal-120v-silicone-heater-edge-to-edge-heaters-with-thermal-switch-protection?_pos=7\u0026amp;_sid=e4ddbe6cc\u0026amp;_ss=r\"\u003eCheck out our new Edge to Edge heaters with Thermal Protection.\u003c\/a\u003e \u003c\/p\u003e\n\u003cp\u003eWhen it comes to the main components of your printer, you don't want to skimp on a no-name product with unverified quality and reliability. This is why we went directly to the source to bring you an assortment of heater pads from Keenovo.\u003c\/p\u003e\n\u003cp\u003eThis page is for the \"Fermio\" style Keenovo Heater Pads, which has cutouts specifically designed to work around the spec slots and cutouts for the Voron build plates. (Note, some kit build plates are not made to spec and this may not fit on those. Buy a spec build plate such to work with this. The West3D carried build plates will work with these).\u003c\/p\u003e\n\u003cp\u003eThe cutouts allow these heater pads to be larger, and therefore apply heat to a greater surface area of your build plate than a traditional pad.\u003c\/p\u003e\n\u003cp\u003eFor added safety all heaters come with a self resetting bi-metal 150C thermal fuse. This turns off the heater if temperatures reaches 150 C due to technical failure of your electronics (only meant as a safety feature, not for temperature regulation).\u003c\/p\u003e\n\u003cp\u003eThermistor used is a NTC 100K thermistor (Beta 25\/50 3950K-1%)\u003c\/p\u003e\n\u003cp\u003eWe carry multiple sizes. Generally, you want a heater pad pad that is a little smaller than your build plate. For instance:\u003c\/p\u003e\n\u003cp\u003eIf you have a:\u003c\/p\u003e\n\u003cp\u003e350mm build plate go with a 340mm pad\u003c\/p\u003e\n\u003cp\u003e300mm build plate go with a 290mm pad\u003c\/p\u003e\n\u003cp\u003e250mm build plate go with a 240mm pad\u003c\/p\u003e\n\u003cp\u003e120mm build plate go with a 110mm pad\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003cstrong\u003eWe DO offer pads without adhesive, if you want those choose the “no adhesive option.” Please note if you do choose this option you will need to find a way to proper secure these to the aluminum bed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease review excerpt from Keenovo's Product Page:\u003c\/p\u003e\n\u003ch2\u003eDESCRIPTION:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePlease choose the \u003cstrong\u003esuitable voltage\u003c\/strong\u003e \u003cstrong\u003eversion\u003c\/strong\u003e for your printer. For buyers within the EU, please buy \u003ca href=\"https:\/\/fermio.xyz\/en\/electronics\/silicone-heaters\/300\/keenovo-silicone-heatmat\" target=\"_blank\"\u003ethe 220V\u003c\/a\u003e version directly from Fermio Labs.\u003c\/li\u003e\n\u003cli\u003eAll pads come with 3M adhesive backing for excellent and easy mounting. Select the no adhesive option if you do not wish to have the 3m backing.\u003c\/li\u003e\n\u003cli\u003eComes with a free NTC 100K thermistor ( Beta 25\/50 3950K-1%, Click \u003ca title=\"NTC-Thermistor-R-T-Table\" href=\"https:\/\/www.keenovo.com\/NTC-Thermistor-R-T-Table.pdf\" target=\"_blank\"\u003eHere\u003c\/a\u003e for the R-T datasheet. Choose type 11 or 13 in Marlin firmware.) unless specified otherwise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIMPORTANT NOTES:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeaters may get super hot. Please handle with care.\u003c\/li\u003e\n\u003cli\u003eBefore purchase, please kindly check if the hole pattern fits your build plate.\u003c\/li\u003e\n\u003cli\u003eRed wires are the Thermistor sensor extenstion wires, white wires are for voltage supply to the heating element.\u003c\/li\u003e\n\u003cli\u003eA supporting frame\/layer is strongly suggested to have the heating element \"sandwiched\" tightly for better heating result. Please kindly check this post about a \u003cstrong\u003e\u003ca href=\"https:\/\/keenovo.store\/blogs\/how-to\/how-to-achieve-a-perfect-installation-of-a-keenovo-heater-pad-to-your-3d-printers-build-plate\" title=\"How to achieve a perfect installation of a Keenovo heater pad to your 3D printer's build plate\" target=\"_blank\"\u003ePerfect Installation\u003c\/a\u003e\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eIf your heater does not come with a Keenovo Digital controller, you may want to wire it via an SSR, please kindly check this post on \u003cstrong\u003e\u003ca href=\"https:\/\/keenovo.store\/blogs\/how-to\/how-to-wire-a-keenovo-heater-pad-to-your-3d-printer-via-an-ssr\" title=\"How to wire a Keenovo heater pad to your 3D printer via an SSR\" target=\"_blank\"\u003eSSR Wiring\u003c\/a\u003e\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eAs we receive customer feedback, we do make small alterations to our products if we feel they improve the their performance and stability. The item(s) you receive might reflect some of these slight changes and improvements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Keenovo","offers":[{"title":"110x110 60W 24V w\/ 150C Built-in Thermostat \/ YES - standard option","offer_id":41219774087336,"sku":"KEE0290","price":29.99,"currency_code":"USD","in_stock":true},{"title":"110x110 60W 24V w\/ 150C Built-in Thermostat \/ NO - Do NOT include adhesive","offer_id":41961162703060,"sku":"KEE0291","price":33.99,"currency_code":"USD","in_stock":true},{"title":"240x240 300W 120V w\/ 150C Built-in Thermostat \/ YES - standard option","offer_id":41219774120104,"sku":"KEE0292","price":62.99,"currency_code":"USD","in_stock":true},{"title":"240x240 300W 120V w\/ 150C Built-in Thermostat \/ NO - Do NOT include adhesive","offer_id":41961162735828,"sku":"KEE0293","price":65.99,"currency_code":"USD","in_stock":true},{"title":"290x290 500W 120V w\/ 150C Built-in Thermostat \/ YES - standard option","offer_id":41219774152872,"sku":"KEE0294","price":79.99,"currency_code":"USD","in_stock":true},{"title":"290x290 500W 120V w\/ 150C Built-in Thermostat \/ NO - Do NOT include adhesive","offer_id":41961162768596,"sku":"KEE0295","price":83.99,"currency_code":"USD","in_stock":true},{"title":"340x340 750W 120v + 150C Built-in Thermostat \/ YES - standard option","offer_id":41219774185640,"sku":"KEE0296","price":102.99,"currency_code":"USD","in_stock":true},{"title":"340x340 750W 120v + 150C Built-in Thermostat \/ NO - Do NOT include adhesive","offer_id":41961162801364,"sku":"KEE0297","price":105.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/keenovo-fermio-style-silicone-heater-heating-pad-west3d-printing-keenovo-455909.gif?v=1691189619"},{"product_id":"50w-24v-heater-cartridge-with-100cm-cable","title":"50W 24V Heater Cartridge with 100CM cable","description":"\u003cp\u003eSize 6x20MM (Compatible with E3D volcano heat blocks). This is a stainless steel (304) 50W heater cartridge with a nice long cable to work with most printers on the market.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trianglelab","offers":[{"title":"Default Title","offer_id":42015853347028,"sku":"TRI0498","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/50w-24v-heater-cartridge-with-100cm-cable-west3d-printing-trianglelab-102420.jpg?v=1691189375"},{"product_id":"e3d-revo™-heatercore","title":"E3D Revo\" HeaterCore (24V and 12V Core) (40w)","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cdiv id=\"ReadMore\" class=\"product-details__description\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThe HeaterCore secures onto a Revo-compatible cold side using a Revo HeaterCore spring (included). After it’s attached, just screw in a \u003ca href=\"https:\/\/west3d.com\/products\/e3d-revo-nozzles?_pos=2\u0026amp;_sid=fc33d0aa4\u0026amp;_ss=r\"\u003eRevo Nozzle\u003c\/a\u003e and you’re ready for simple, tool-free nozzle swaps that don’t need hot tightening.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHeats up much faster than a typical heaterblock. It’s designed to be much safer, too – a positive temperature coefficient (PTC) means power reduces as it gets hotter, reducing hazards in the event of a thermal runaway.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible with many popular 3D printers such as Creality CR series and Ender series, Prusa, Anet, Biqu, Monoprice, and many more. \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLearn everything you need to know about the Revo HeaterCore in E3D's\u003ca href=\"https:\/\/e3d-online.com\/blogs\/news\/revo-heatercore-features\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/e3d-online.com\/blogs\/news\/revo-heatercore-features\"\u003e blog\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUnsure on the voltage you need? E3D has a nice page to help you identify the voltage from your power supply: \u003ca href=\"https:\/\/e3d-online.com\/blogs\/news\/12v-vs-24v\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/e3d-online.com\/blogs\/news\/12v-vs-24v\"\u003ehttps:\/\/e3d-online.com\/blogs\/news\/12v-vs-24v\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"E3D","offers":[{"title":"24V","offer_id":43496287076564,"sku":"RC-CORE-24V-AS-SPRING","price":29.99,"currency_code":"USD","in_stock":true},{"title":"12V","offer_id":43496287109332,"sku":"E3D0722","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/e3d-revo-heatercore-24v-and-12v-core-40w-west3d-3d-printing-supplies-e3d-586257.webp?v=1702493738"},{"product_id":"chc-ceramic-heater-core-hot-end-kit-v6-and-volcano-variants-pro","title":"CHC (Ceramic Heater Core) Hot End Kit - V6 and Volcano Variants (Pro)","description":"\u003cp\u003eThis is basically a super V6 - it uses the same components as a V6 (or Volcano Variant depending on which you choose) with an upgraded ceramic heater core. The benefits are better flow and faster heating at a price much more affordable than a Rapido which shares a similar heater core element. \u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\"\u003eV6 (or Volcano) Brass Nozzle (.4mm)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eCHC Cermamic Heater core\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eStainless Steel Heat Break\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eV6 Heatsink\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Trianglelab","offers":[{"title":"V6 (104-NT Standard)","offer_id":44776137359572,"sku":"TRI0842","price":26.99,"currency_code":"USD","in_stock":true},{"title":"V6 (Pt1000B)","offer_id":43065818153172,"sku":"TRI0843","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Volcano","offer_id":43065818185940,"sku":"TRI0844","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/chc-ceramic-heater-core-hot-end-kit-v6-and-volcano-variants-pro-west3d-printing-trianglelab-751377.jpg?v=1691189420"},{"product_id":"thermistor-104nt-e3d","title":"Thermistor (104NT) E3D","description":"\u003ch3 data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eProduct Description:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eA replacement E3D cartridge type Semitec 104NT thermistor suitable for all E3D and most other printer HotEnds using a cartridge type Heaterblock.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003cb\u003e\u003cstrong\u003eThermistor cartridge\u003c\/strong\u003e\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eCartridge type thermistors use a Semitec 104NT thermistor, potted in a cylindrical stainless steel cartridge with a high conductivity ceramic based adhesive. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe legs are insulated with fibreglass sleeving and terminated with a Molex Microfit 3.0 connector. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThis makes it easy to disconnect your entire HotEnd without the need for rewiring, especially when paired with our high precision heater cartridges.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cstrong\u003eKey features: \u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cstrong\u003e- \u003c\/strong\u003e\u003c\/b\u003eMax temperature rating: 300°C\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cstrong\u003e- \u003c\/strong\u003e\u003c\/b\u003eCartridge diameter: 3mm \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003c\/b\u003e Cartridge length: 15mm \u003c\/p\u003e\n\u003cp\u003e- Cable Length: 50mm\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003c\/b\u003e Cable Colour: Blue\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003c\/b\u003e Connector type: Molex Microfit 3.0\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cstrong\u003eKit includes: \u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003c\/b\u003e 1 x Thermistor cartridge \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003c\/b\u003e 1 x Thermistor extension cable (length: 1m)\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e","brand":"E3D","offers":[{"title":"With extension cable","offer_id":45600619397332,"sku":"E3D0993","price":8.49,"currency_code":"USD","in_stock":true},{"title":"Without extension cable","offer_id":45600619430100,"sku":"E3D0994","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/thermistor-104nt-e3d-west3d-printing-e3d-252192.webp?v=1691189694"},{"product_id":"100k-ohm-ntc-thermistor-semitec","title":"100k Ohm NTC Thermistor - Semitec","description":"\u003cdiv\u003e\n    \u003ch2\u003e100k Ohm NTC Thermistor - Semitec\u003c\/h2\u003e\n    \u003cp\u003eIntroducing the \u003cstrong\u003e100k Ohm NTC Thermistor\u003c\/strong\u003e from Semitec, designed for precision temperature measurement in a variety of applications. This thermistor, model \u003cstrong\u003e104GT-2\u003c\/strong\u003e, stands out as a reliable solution for both hobbyists and professionals alike.\u003c\/p\u003e\n    \n    \u003ch3\u003eKey Features:\u003c\/h3\u003e\n    \u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003eHigh Precision:\u003c\/strong\u003e Achieve accurate temperature readings with a 100k Ohm resistance at 25°C.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Ideal for use with clamping style heater blocks and a wide range of other devices requiring temperature monitoring.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eDurable Design:\u003c\/strong\u003e Built to withstand various environmental conditions, ensuring longevity and reliability.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eEasy Installation:\u003c\/strong\u003e User-friendly design allows for straightforward integration into your existing systems.\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003ch3\u003eWhy Choose Semitec?\u003c\/h3\u003e\n    \u003cp\u003eSemitec is renowned for its commitment to quality and innovation. This NTC thermistor is not just a replacement part; it's a testament to advanced engineering that guarantees performance and accuracy. With this product, you can trust that you're getting the best in temperature sensing technology.\u003c\/p\u003e\n\n    \u003ch3\u003eApplications:\u003c\/h3\u003e\n    \u003cul\u003e\n        \u003cli\u003e3D Printers\u003c\/li\u003e\n        \u003cli\u003eHVAC Systems\u003c\/li\u003e\n        \u003cli\u003eMedical Equipment\u003c\/li\u003e\n        \u003cli\u003eIndustrial Temperature Control\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp\u003eChoose the Semitec \u003cstrong\u003e100k Ohm NTC Thermistor\u003c\/strong\u003e for your temperature measurement needs and experience the difference in quality and performance.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Semitec","offers":[{"title":"Default Title","offer_id":43406022017236,"sku":"SEM0994","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/100k-ohm-ntc-thermistor-semitec-west3d-printing-semitec-400395.jpg?v=1691189367"},{"product_id":"genuine-prusa-thermistor-e3d-oem","title":"Genuine Prusa Thermistor E3D OEM","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003eA standard Semitec thermistor cartridge with a Prusa specific extension cable and connector. This is the same thermistor supplied directly to Prusa.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003cb\u003e\u003cstrong\u003eKey features:\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cbr\u003e\u003cb\u003e\u003cstrong\u003e- \u003c\/strong\u003e\u003c\/b\u003eMax temperature rating: 300°C\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cb\u003e\u003cstrong\u003e- \u003c\/strong\u003e\u003c\/b\u003eCartridge diameter: 3mm \u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cb\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003c\/b\u003e Cartridge length: 15mm \u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e- Cable Length: 750mm\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cb\u003e\u003cstrong\u003e-\u003c\/strong\u003e\u003c\/b\u003e Connector type: Molex 5057-9402\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":43496265842900,"sku":"E3D1064","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/genuine-prusa-thermistor-e3d-oem-west3d-printing-e3d-666617.webp?v=1691189442"},{"product_id":"prusa-specific-heater-cartridge-40w-genuine-e3d-oem","title":"Prusa Specific Heater Cartridge (40W) Genuine E3D OEM","description":"\u003cp\u003eThis is the exact heater cartridge provided by Prusa on the MK3 MK3S and MK3s+. E3D Genuine 40W cartridge \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":43496321351892,"sku":"TRI1067","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/prusa-specific-heater-cartridge-40w-genuine-e3d-oem-west3d-printing-trianglelab-878545.jpg?v=1691189684"},{"product_id":"pt1000-thermistor-e3d","title":"PT1000 Thermistor E3D","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003ePT1000's are RTD temperature sensors like PT100’s but do not require an additional amplifier board, meaning they can be connected to your pre-existing temperature sensing pin using a 4.7k pullup resistance. Also, no fiberglass sleeving!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eMax temperature: 500°C\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eCartridge diameter: 3 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eCartridge length: 15 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eCable length 50mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eCable color: Black\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003eConnector type: Molex Microfit 3.0\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eItems included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e1 x PT1000 cartridge\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e1 x Extension cable\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":43601472094420,"sku":"E3D1137","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/pt1000-thermistor-e3d-west3d-printing-e3d-298388.jpg?v=1691189687"},{"product_id":"ldo-polyimide-heater-and-200w-psu-for-v0-v0-s1","title":"LDO Polyimide Heater, Aluminum Bed and optional 200W PSU (for V0\/V0-S1)","description":"\u003cp\u003eInsanely fast bed heating for all of us who can't wait an extra minute to get printing. For all V0 series of printers and 120x120 size beds. \u003c\/p\u003e\n\u003cp\u003eThe kit contains a bed with heater and thermal fuse pre-mounted, screw-in thermistor, and (optionally) a ATAZ 200W 24v power supply.\u003c\/p\u003e\n\u003cp\u003eWatch this comparison video from Maple Leaf Makers to see how fast this bed really heats up:\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Polyimide Heater Comparison\" href=\"https:\/\/www.youtube.com\/watch?v=HFgLAji_0lM\"\u003ePolyimide Heater Comparison\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"LDO Motors","offers":[{"title":"With 200W PSU","offer_id":44087662215380,"sku":"LDO1149","price":74.99,"currency_code":"USD","in_stock":false},{"title":"Without 200W PSU","offer_id":44087662248148,"sku":"LDO1150","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/ldo-polyimide-heater-aluminum-bed-and-200w-psu-for-v0v0-s1-west3d-printing-ldo-motors-579434.jpg?v=1691189623"},{"product_id":"silicone-heater-heating-pad-for-3d-printers","title":"3DMakerParts Silicone Heater \/ Heating Pad for 3D Printers","description":"\u003cp\u003eWhen it comes to the main components of your printer, you don't want to skimp\u003c\/p\u003e\n\u003cp\u003e350mm build plate go with a 320mm pad\u003c\/p\u003e\n\u003cp\u003e300mm build plate go with a 270mm pad\u003c\/p\u003e\n\u003cp\u003e250mm build plate go with a 220mm pad\u003c\/p\u003e\n\u003cp\u003e IMPORTANT NOTES:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeaters may get super hot. Please handle with care.\u003c\/li\u003e\n\u003cli\u003eRed wires are the Thermistor sensor extenstion wires, white wires are for voltage supply to the heating element.\u003c\/li\u003e\n\u003cli\u003eA supporting frame\/layer is strongly suggested to have the heating element \"sandwiched\" tightly for better heating result. Please kindly check this post about a \u003cstrong\u003e\u003ca title=\"How to achieve a perfect installation of a Keenovo heater pad to your 3D printer's build plate\" href=\"https:\/\/keenovo.store\/blogs\/how-to\/how-to-achieve-a-perfect-installation-of-a-keenovo-heater-pad-to-your-3d-printers-build-plate\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePerfect Installation\u003c\/a\u003e\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eYou may  (ok you really should) want to wire it via an SSR, please kindly check this post on \u003cstrong\u003e\u003ca title=\"How to wire a Keenovo heater pad to your 3D printer via an SSR\" href=\"https:\/\/keenovo.store\/blogs\/how-to\/how-to-wire-a-keenovo-heater-pad-to-your-3d-printer-via-an-ssr\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSSR Wiring\u003c\/a\u003e\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eThe controller unit is 100% brand new. Yet due to manufacturing reasons, stains, dusts or scratches may be present on the silicone case. It may also fit less tight as shown in the picture. Please consider this before the purchase.\u003c\/li\u003e\n\u003cli\u003eIf your heater comes with a built-in thermostat, please kindly note that the thermostat, being mechanical (bi-metal and snap action), should not be considered as a precise temperature control device, but as an auto-regulating and over-heating protection device. Its action temperatures may be subjected to certain tolerances or hysteresis due to factors such as heater power rating, ambient temperatures and heat consumption\/loss rate etc.\u003c\/li\u003e\n\u003cli\u003eAs we receive customer feedback, we do make small alterations to our products if we feel they improve the their performance and stability. The item(s) you receive might reflect some of these slight changes and improvements.\u003c\/li\u003e\n\u003cli\u003eDo not cut the heater.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThermistor type NTC 100K. In Klipper use Generic 3950\u003c\/strong\u003e\u003c\/p\u003e","brand":"3DMakerParts","offers":[{"title":"220x220 300W 120V + 150C Built-in Thermostat","offer_id":43768329175252,"sku":"3DM1245","price":34.99,"currency_code":"USD","in_stock":true},{"title":"270x270 500W 120V + 150C Built-in Thermostat","offer_id":43768329208020,"sku":"3DM1246","price":49.99,"currency_code":"USD","in_stock":true},{"title":"320x320 750W 120v + 150C Built-in Thermostat","offer_id":43768329240788,"sku":"3DM1247","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/3dmakerparts-silicone-heater-heating-pad-for-3d-printers-west3d-printing-3dmakerparts-992582.jpg?v=1691189369"},{"product_id":"e3d-revo™-60w-heatercore-24v-and-12v-core","title":"E3D Revo\" 60w HeaterCore (24V Core)","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cdiv id=\"ReadMore\" class=\"product-details__description\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ciframe src=\"https:\/\/spinzam.com\/shot\/embed\/?idx=398210\" width=\"640\" height=\"640\" style=\"max-width: 100%; max-height: 100vw;\" frameborder=\"0\" scrolling=\"no\"\u003e\u003c\/iframe\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExperience even faster heating and ability to print and hold at higher temperatures with this upgraded 60W heater core from E3D\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThe HeaterCore secures onto a Revo-compatible cold side using a Revo HeaterCore spring (included). After it’s attached, just screw in a \u003ca href=\"https:\/\/west3d.com\/products\/e3d-revo-nozzles?_pos=2\u0026amp;_sid=fc33d0aa4\u0026amp;_ss=r\"\u003eRevo Nozzle\u003c\/a\u003e and you’re ready for simple, tool-free nozzle swaps that don’t need hot tightening.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHeats up much faster than a typical heaterblock. It’s designed to be much safer, too – a positive temperature coefficient (PTC) means power reduces as it gets hotter, reducing hazards in the event of a thermal runaway.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible with many popular 3D printers such as Creality CR series and Ender series, Prusa, Anet, Biqu, Monoprice, and many more. \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLearn everything you need to know about the Revo HeaterCore in E3D's\u003ca href=\"https:\/\/e3d-online.com\/blogs\/news\/revo-heatercore-features\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/e3d-online.com\/blogs\/news\/revo-heatercore-features\"\u003e blog\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUnsure on the voltage you need? E3D has a nice page to help you identify the voltage from your power supply: \u003ca href=\"https:\/\/e3d-online.com\/blogs\/news\/12v-vs-24v\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/e3d-online.com\/blogs\/news\/12v-vs-24v\"\u003ehttps:\/\/e3d-online.com\/blogs\/news\/12v-vs-24v\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"E3D","offers":[{"title":"24V","offer_id":43789959102676,"sku":"RC-CORE-24V-60W-AS-SPRING","price":35.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/e3d-revo-60w-heatercore-24v-core-west3d-printing-e3d-351681.jpg?v=1691189427"},{"product_id":"phaetus-dropeffect-xg-ceramic-ring-heater-core-replacement","title":"Phaetus DropEffect XG Ceramic Ring Heater Core Replacement Heat Block","description":"\u003cp\u003eThis is a replacement heater heat block to replace a damaged one on your Phaetus \/ Drop Effect XG Hot End\u003cbr\u003e\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Default Title","offer_id":43901337600212,"sku":"PHA1404","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/phaetus-dropeffect-xg-ceramic-ring-heater-core-replacement-heat-block-west3d-printing-phaetus-534487.jpg?v=1692467849"},{"product_id":"phaetus-dropeffect-xg-hot-end-thermistor-replacement","title":"Phaetus DropEffect XG Hot End Thermistor Replacement","description":"\u003cp\u003eThis is a replacement thermistor to replace a damaged one on your Phaetus \/ Drop Effect XG Hot End\u003cbr\u003e\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Default Title","offer_id":43901342941396,"sku":"PHA1405","price":7.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/phaetus-dropeffect-xg-hot-end-thermistor-replacement-west3d-printing-phaetus-761715.jpg?v=1692467849"},{"product_id":"skr-mini-e3-thermistor-expander","title":"SKR MINI E3 Thermistor Expander","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis board allows you to use the TFT header on SKR Mini E3 boards (V1.2, V2.0, and V3) as 2 more thermistor inputs. This is helpfull if you want to use the \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/VoronDesign\/Voron-Hardware\/tree\/master\/SKR-Mini_Screen_Adaptor\" data-mce-href=\"https:\/\/github.com\/VoronDesign\/Voron-Hardware\/tree\/master\/SKR-Mini_Screen_Adaptor\" data-mce-fragment=\"1\"\u003eEXP1 and SPI header for a display\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMore info can be found here: \u003ca href=\"https:\/\/github.com\/VoronDesign\/Voron-Hardware\/tree\/master\/SKR-Mini_TFT_Thermistor_Board\" target=\"_blank\"\u003eSKR Mini E3 Thermistor Expander\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/Screen_Shot_2021-10-08_at_10.11.06_PM_480x480.png?v=1633756306\" alt=\"\"\u003e\u003c\/p\u003e","brand":"X.R. Bunker","offers":[{"title":"Default Title","offer_id":43921412587732,"sku":"X.R1421","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/skr-mini-e3-thermistor-expander-west3d-printing-xr-bunker-645582.jpg?v=1693627936"},{"product_id":"phaetus-rapido-2-ceramic-heating-kit-replacement-heater-for-rapido-2-hot-ends","title":"Phaetus Rapido 2 Ceramic Heating Kit Replacement \/ Heater for Rapido 2 Hot Ends","description":"\u003cp\u003eYou broke it, or it broke because it had a bad day - either way we are here to help you fix it. This is a replacement heater setup for the Rapido 2, both HF and UHF variants.\u003cbr\u003e\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Default Title","offer_id":43934759715028,"sku":"PHA1436","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/phaetus-rapido-2-ceramic-heating-kit-replacement-heater-for-rapido-2-hot-ends-west3d-printing-phaetus-423291.jpg?v=1694622291"},{"product_id":"phaetus-rapido-2-104nt-temperature-sensor-thermistor-replacement","title":"Phaetus Rapido 2 104NT and PT1000 Temperature Sensor (Thermistor) Replacement","description":"\u003cp\u003eThis is a replacement screw in thermistor (104NT or PT1000) to replace a damaged one on your Rapido 2 hot end.\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"104NT (Standard)","offer_id":43934776492244,"sku":"PHA1438","price":11.99,"currency_code":"USD","in_stock":true},{"title":"PT1000 (Plus) (Updated)","offer_id":43934776525012,"sku":"PHA1439","price":14.99,"currency_code":"USD","in_stock":true},{"title":"PT1000 (Plus) (Original Screw In)","offer_id":46002202083540,"sku":"PHA2513PT1","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/phaetus-rapido-2-104nt-and-pt1000-temperature-sensor-thermistor-replacement-west3d-printing-phaetus-655503.jpg?v=1694622292"},{"product_id":"revo-high-temperature-heaterblock-heat-block-revo-ht-htx","title":"Revo High-Temperature HeaterBlock (Heat Block) Revo HT","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cdiv class=\"product__description rte quick-add-hidden\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan class=\"TextRun SCXW51947284 BCX0\" lang=\"EN-GB\" data-contrast=\"auto\" data-mce-fragment=\"1\" xml:lang=\"EN-GB\"\u003e\u003cspan class=\"NormalTextRun SCXW51947284 BCX0\" data-mce-fragment=\"1\"\u003eThis plated copper \u003c\/span\u003e\u003cspan class=\"NormalTextRun SpellingErrorV2Themed SCXW51947284 BCX0\" data-mce-fragment=\"1\"\u003eHeaterBlock\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW51947284 BCX0\" data-mce-fragment=\"1\"\u003e allows you to reach up to 500°C with your Rev\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW51947284 BCX0\" data-mce-fragment=\"1\"\u003eo system\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW51947284 BCX0\" data-mce-fragment=\"1\"\u003e (providing you use a PT100 or PT1000 thermistor)\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW51947284 BCX0\" data-mce-fragment=\"1\"\u003e, \u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW51947284 BCX0\" data-mce-fragment=\"1\"\u003eunlocking the possibilities of printing high-temperature filaments such a\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW51947284 BCX0\" data-mce-fragment=\"1\"\u003es \u003c\/span\u003e\u003cspan class=\"NormalTextRun SpellingErrorV2Themed SCXW51947284 BCX0\" data-mce-fragment=\"1\"\u003eUlt\u003c\/span\u003e\u003cspan class=\"NormalTextRun SpellingErrorV2Themed SCXW51947284 BCX0\" data-mce-fragment=\"1\"\u003eem\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW51947284 BCX0\" data-mce-fragment=\"1\"\u003e and PEEK.\u003c\/span\u003e\u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559739\":160,\"335559740\":259}' class=\"EOP SCXW51947284 BCX0\" data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559739\":160,\"335559740\":259}' class=\"EOP SCXW51947284 BCX0\" data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"UTF-8\"\u003e\n\u003cstrong\u003e⚠️ WARNING: \u003c\/strong\u003e\u003cspan\u003eThis product can expose you to chemicals including Mineral Oils, which is known to the State of California to cause cancer, and Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"E3D","offers":[{"title":"Default Title","offer_id":43947484152020,"sku":"E3D1449","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/revo-high-temperature-heaterblock-heat-block-revo-ht-htx-west3d-printing-e3d-604796.webp?v=1695451026"},{"product_id":"e3d-revo™-high-temperature-heater-cartridge-ht-htx-65w-heatercore-24v","title":"E3D Revo\" High-Temperature Heater Cartridge HT \/ HT-Abrasive 65w HeaterCore (24v)","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003cdiv id=\"ReadMore\" class=\"product-details__description\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cb\u003eHigh-temperature heater cartridges \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eIdeal for high-temperature Thermoplastics such as PEEK or PEI. These cartridges have been designed for longevity at elevated temperatures whilst reducing heat up time. While most standard 3D printer heater cartridges will reach high temperatures, they tend to fail after short service lives. If you are printing high-temperature materials, and need consistent reliable service without downtime for heater failure this is the heater you need.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePlease note: \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThese heaters are more than capable of reaching temperatures that will soften the aluminum block shipped as standard with our heaters. These must only be used with a copper block and we recommend only using them with our Revo HTX nozzles. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cstrong\u003e⚠️ WARNING: \u003c\/strong\u003e\u003cspan\u003eThis product can expose you to chemicals including Mineral Oils, which is known to the State of California to cause cancer, and Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"E3D","offers":[{"title":"24V","offer_id":43947499585748,"sku":"E3D1454","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/e3d-revo-high-temperature-heater-cartridge-ht-htx-65w-heatercore-24v-west3d-printing-e3d-541997.webp?v=1695450709"},{"product_id":"universal-180-300w-120v-silicone-heater-edge-to-edge-for-pfa-micron-and-salad-fork-180mm-build-plates","title":"Universal 180 300W \/ 320W 120V Silicone Heater Edge to Edge for PFA Micron and Salad Fork 180mm Build Plates -","description":"\u003cp\u003eThis heater is exclusively designed by West3D to fit edge to edge on build plates for the 180mm sized Salad Fork and Micron. \u003c\/p\u003e\n\u003cp\u003eThis heater is no slouch, at 300W or 320W this heats up quick, and the Lohmann adhesive is rated for long term use at high temperature.\u003c\/p\u003e\n\u003cp\u003eThe heater uses a NTC 100K Thermistor, and features both the heater and thermistor elevated from the bottom of the silicon pad to allow for traversing any obstacles that may present themselves. The heater and thermistor wire are long enough for any 180mm size build (by quite a bit!). \u003c\/p\u003e\n\u003cp\u003eThe second variant (320W) is similar to the first, but we have increased the wattage to 320W AND it includes a self-resetting thermal switch (CF79F-150A) which provides added protection in the event of a thermal runaway (above 150C). Please note, the switch is meant as a backup to a lower rated fuse, please do not assume this will provide 100% protection. The fuse does sit up higher and may require a spacer or slightly higher standoff on Salad Fork.\u003c\/p\u003e","brand":"WEST3D","offers":[{"title":"300W Standard Edge to Edge","offer_id":44579567829204,"sku":"WES1658","price":32.99,"currency_code":"USD","in_stock":false},{"title":"320W Thermal Switching Edge to Edge","offer_id":44579567861972,"sku":"WES1659","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/universal-180-300w-120v-silicone-heater-edge-to-edge-for-pfa-micron-and-salad-fork-180mm-build-plates-west3d-3d-printing-supplies-west3d-878022.jpg?v=1705394097"},{"product_id":"one-more-stupid-thermistor-pcb-by-cbc02009-smd-thermistor-expander-board","title":"One more Stupid Thermistor PCB by CBC02009 (SMD Thermistor Expander Board)","description":"\u003cp dir=\"auto\"\u003eFor when you need just one (or two) more stupid thermistor ports on your printer. This board comes with a RP2040.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFor more information and sample config see: \u003ca href=\"https:\/\/github.com\/cbc02009\/OneMoreStupidThermistor\"\u003ehttps:\/\/github.com\/cbc02009\/OneMoreStupidThermistor\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"XR Bunker","offers":[{"title":"Default Title","offer_id":44301399752916,"sku":"XR 1674","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/products\/one-more-stupid-thermistor-pcb-by-cbc02009-smd-thermistor-expander-board-west3d-3d-printing-supplies-xr-bunker-646203.jpg?v=1705891189"},{"product_id":"universal-120v-silicone-heater-edge-to-edge-heaters-with-thermal-switch-protection","title":"Universal 120V Silicone Heater Edge to Edge Heaters with Thermal Switch Protection AC Bed Heater","description":"\u003cp\u003eOur Performance for All 180 Series heater is exclusively designed by West3D to fit edge to edge on Voron style build plates (but will fit any printer that has the appropriate size build plate). Looking for a heater for your 180mm Printers for Ants? \u003ca href=\"https:\/\/west3d.com\/products\/universal-180-300w-120v-silicone-heater-edge-to-edge-for-pfa-micron-and-salad-fork-180mm-build-plates?_pos=10\u0026amp;_sid=e4ddbe6cc\u0026amp;_ss=r\"\u003eHere you go!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThese heaters are no slouch and \u003cstrong\u003eheat quickly\u003c\/strong\u003e due to their higher than average wattage, and will stay adhered without too much smell due to the \u003cstrong\u003eLohmann adhesive\u003c\/strong\u003e rated for long term use at high temperature. Lastly, unlike other heaters in the industry, our heaters come with \u003cstrong\u003ebackup thermal protection\u003c\/strong\u003e through the use of a self-resetting switch (CF79F-150A rated for 150C). Please note, the switch is meant as a backup to a lower rated fuse, please do not assume this will provide 100% protection, and never operate the printer when you're not able to monitor and shut off in the event of a thermal anomaly.\u003c\/p\u003e\n\u003cp\u003eThe heater uses a NTC 100K Thermistor, and features both the heater and thermistor elevated from the bottom of the silicon pad to allow for traversing any obstacles that may present themselves. The heater and thermistor wire are long enough for almost any build. Set your printer config in Klipper to Generic 3950 thermistor type.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note - these are sized within 1 mm of the standard build plate size please make sure your surface is larger than the heater or size down. For Voron sizes, build plates are typically 5mm larger than the stated size and these are designed to work perfectly for standard aluminum build plates.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur heaters come from a factory that maintains various certifications, including CE. These are not labeled on the heaters themselves as we intend these to be purchased only within the United States (due to voltage requirements).\u003c\/p\u003e\n\u003ch2\u003eIMPORTANT NOTES:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeaters may get super hot. Please handle with care.\u003c\/li\u003e\n\u003cli\u003eBefore purchase, please kindly check if the hole pattern fits your build plate.\u003c\/li\u003e\n\u003cli\u003eRed wires are the Thermistor sensor extenstion wires, white wires are for voltage supply to the heating element.\u003c\/li\u003e\n\u003cli\u003eA supporting frame\/layer is strongly suggested to have the heating element \"sandwiched\" tightly for better heating result. Please kindly check this post about a \u003cstrong\u003e\u003ca rel=\"noopener\" title=\"How to achieve a perfect installation of a Keenovo heater pad to your 3D printer's build plate\" href=\"https:\/\/keenovo.store\/blogs\/how-to\/how-to-achieve-a-perfect-installation-of-a-keenovo-heater-pad-to-your-3d-printers-build-plate\" target=\"_blank\"\u003ePerfect Installation\u003c\/a\u003e\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003ePlease kindly check this post on \u003cstrong\u003e\u003ca rel=\"noopener\" title=\"How to wire a Keenovo heater pad to your 3D printer via an SSR\" href=\"https:\/\/keenovo.store\/blogs\/how-to\/how-to-wire-a-keenovo-heater-pad-to-your-3d-printer-via-an-ssr\" target=\"_blank\"\u003eSSR Wiring\u003c\/a\u003e from Keenovo\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eAs we receive customer feedback, we do make small alterations to our products if we feel they improve the their performance and stability. The item(s) you receive might reflect some of these slight changes and improvements.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WEST3D","offers":[{"title":"116x116mm 120W (for 120+mm build surfaces)","offer_id":44579651387604,"sku":"WES1765","price":25.99,"currency_code":"USD","in_stock":false},{"title":"249x249mm 350W (for 250+ mm build surfaces)","offer_id":44579624911060,"sku":"WES1766","price":54.99,"currency_code":"USD","in_stock":true},{"title":"299x299mm 550W (for 300+mm build surfaces)","offer_id":44579624943828,"sku":"WES1767","price":69.99,"currency_code":"USD","in_stock":false},{"title":"349x349mm 800W (for 350+mm build surfaces)","offer_id":44579651420372,"sku":"WES1768","price":89.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/universal-120v-silicone-heater-edge-to-edge-heaters-with-thermal-switch-protection-west3d-3d-printing-supplies-west3d-779788.jpg?v=1711450241"},{"product_id":"e3d-revo-hot-side-heater-core-and-nozzle-kit-starter-high-flow-genius-400-genius-metal","title":"E3D Revo Hot Side Heater Core and Nozzle Kit- Starter \/ High Flow \/ Genius","description":"\u003cp\u003eIntroducing the new E3D Configurable Revo-lution! A Revo Kit contains a hot-side (this product) and a \u003ca href=\"https:\/\/west3d.com\/products\/e3d-revo-cold-side-voron-creality-prusa-others\"\u003ecold-side\u003c\/a\u003e. With our Configurator you can order all of these in one place. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/west3d.com\/products\/revo-voron-hot-end-complete-kit-builder?_pos=3\u0026amp;_sid=7afe1a8f2\u0026amp;_ss=r\"\u003eRevo For Voron Configurator\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/west3d.com\/products\/e3d-revo%E2%84%A2-prusa-edition-rapidchange-hot-end-revo-mk3-and-mini-builder?_pos=4\u0026amp;_sid=7afe1a8f2\u0026amp;_ss=r\"\u003eRevo For Prusa Configurator\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/west3d.com\/products\/e3d-revo-voron-complete-hot-end-configurator?_pos=2\u0026amp;_sid=7afe1a8f2\u0026amp;_ss=r\"\u003eRevo Six Configruator\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/west3d.com\/products\/e3d-roto-extruder-revo-builder?_pos=6\u0026amp;_sid=7afe1a8f2\u0026amp;_ss=r\"\u003eRevo Roto Configurator\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/west3d.com\/products\/e3d-revo-hot-end-for-creality-printers-such-as-ender-3-5-cr-10-etc-most-models-builder?_pos=5\u0026amp;_sid=7afe1a8f2\u0026amp;_ss=r\"\u003eRevo For Creality Configurator \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/west3d.com\/products\/e3d-revo-voron-complete-hot-end-configurator?_pos=2\u0026amp;_sid=7afe1a8f2\u0026amp;_ss=r\"\u003eRevo For Hemera Configurator\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/west3d.com\/products\/e3d-revo-lgx-micro-complete-hot-end-builder?_pos=7\u0026amp;_sid=7afe1a8f2\u0026amp;_ss=r\"\u003eRevo LGX Micro Configurator\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eConfigurator Hot Side packs contain 5 package types (Starter, High Flow, High Flow X, Genius 400 and Genius Metal). Each package type contains the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch3\u003eStarter:\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003e0.4mm Brass Nozzle\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e0.6mm Brass Nozzle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e40W HeaterCore\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch3\u003eHigh Flow:\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003e0.4mm Brass High Flow Nozzle\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e0.6mm Brass High Flow Nozzle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e60W HeaterCore\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eBONUS 0.4mm Brass Nozzle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eBONUS Revo Sock Pack\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch3\u003eHigh Flow X:\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003e0.4mm ObXidian High Flow Nozzle\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e0.6mm ObXidian High Flow Nozzle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e60W HeaterCore\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eBONUS 0.4mm Brass Nozzle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eBONUS Revo Sock Pack\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch3\u003eGenius 400:\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003e0.4mm ObXidian Nozzle\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e0.6mm High Flow ObXidian Nozzle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e0.4mm Brass Non Planar Nozzle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e0.6mm HighTemperature (HT) Abrasive Nozzle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e60W HeaterCore\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eHT HotSide HP Heater\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eBONUS 0.25mm Brass Nozzle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eBONUS Revo Sock Pack\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch3\u003eGenius Metal:\u003c\/h3\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003e0.4mm ObXidian Nozzle\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e0.6mm High Flow ObXidian Nozzle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e0.4mm Brass Non Planar Nozzle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e0.6mm HighTemperature (HT) Abrasive Nozzle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e0.4mm DiamondBack Nozzle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e60W HeaterCore\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eHT HotSide HP Heater\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eBONUS 0.25mm Brass Nozzle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eBONUS Revo Sock Pack\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThis product is in case you only need the hot-side part of the kit.\u003c\/p\u003e","brand":"E3D","offers":[{"title":"Starter 12V 104NT","offer_id":44656244162772,"sku":"E3D1784","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Starter 24V 104NT","offer_id":44656377037012,"sku":"E3D1785","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Starter 12V Creality","offer_id":44656377069780,"sku":"E3D1786","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Starter 24V Creality","offer_id":44656377102548,"sku":"E3D1787","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Starter 24V Creality Sprite","offer_id":44656377135316,"sku":"E3D1788","price":49.99,"currency_code":"USD","in_stock":false},{"title":"High Flow 24V 104NT","offer_id":44656377168084,"sku":"REVO-HOT-KIT-HF-24V","price":114.99,"currency_code":"USD","in_stock":true},{"title":"High Flow X 24V 104NT","offer_id":44656377200852,"sku":"REVO-HOT-KIT-HF-X-24V","price":164.99,"currency_code":"USD","in_stock":true},{"title":"Genius 400 PT100 24V","offer_id":44656377233620,"sku":"E3D1791","price":276.9,"currency_code":"USD","in_stock":true},{"title":"Genius 400 PT1000 24V","offer_id":44656377266388,"sku":"E3D1792","price":276.9,"currency_code":"USD","in_stock":true},{"title":"Genius Metal PT100 24V","offer_id":44656377299156,"sku":"E3D1793","price":374.99,"currency_code":"USD","in_stock":true},{"title":"Genius Metal PT1000 24V","offer_id":44656377331924,"sku":"E3D1794","price":374.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/e3d-revo-hot-side-heater-core-and-nozzle-kit-starter-high-flow-genius-west3d-3d-printing-supplies-e3d-448260.webp?v=1712112780"},{"product_id":"smart-orbiter-v3-0-ceramic-heater-v3-by-ldo-motors","title":"Smart Orbiter V3.0 Ceramic Heater (V3) by LDO Motors","description":"\u003cp\u003eThis is an OEM replacement part for the Ceramic Heater on an Orbiter V3.0\u003c\/p\u003e","brand":"LDO Motors","offers":[{"title":"Default Title","offer_id":45011550896340,"sku":"LDO1956","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/smart-orbiter-v30-ceramic-heater-v3-by-ldo-motors-west3d-3d-printing-supplies-ldo-motors-904761.jpg?v=1715013251"},{"product_id":"smart-orbiter-v3-0-hot-end-heatercore-assmebly-v3-by-ldo-motors","title":"Smart Orbiter V3.0 Hot End \/ Heatercore Assmebly (V3) by LDO Motors","description":"\u003cp\u003eThis is an OEM replacement part for the Hot Side (heater\/thermistor\/heatbreak\/sock) on an Orbiter V3.0 and includes thermal grease.\u003cbr\u003e\u003c\/p\u003e","brand":"LDO Motors","offers":[{"title":"Default Title","offer_id":45011563151572,"sku":"LDO1959","price":26.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/smart-orbiter-v30-hot-end-heatercore-assmebly-v3-by-ldo-motors-west3d-3d-printing-supplies-ldo-motors-603656.jpg?v=1715013259"},{"product_id":"high-wattage-cartridge-heaters-24v-48v","title":"High Wattage Cartridge Heaters - 24v \u0026 48v","description":"\u003cp\u003eHigh-Wattage heater cartridges compatible with the Chube, Dragon UHF, and many more!\u003cbr\u003e\u003cbr\u003eSizes: 6mm Diameter, 20mm and 47mm length\u003c\/p\u003e\n\u003cp\u003eWattages: 50w, 80w, 100w, 120w, 140w\u003c\/p\u003e\n\u003cp\u003eVoltages: 24V, 48V\u003c\/p\u003e\n\u003cp\u003eCasing: Rated for 550c Continuous Usage, Wires rated for up to 300c Chamber.\u003c\/p\u003e\n\u003cp\u003eWire Gauge: 18ga\u003c\/p\u003e\n\u003cp\u003eWire Length: 150mm\u003c\/p\u003e\n\u003c!----\u003e","brand":"Luke's Laboratory","offers":[{"title":"Standard (20mm) \/ 80W \/ 24V","offer_id":45489485676756,"sku":"LUK2096STA80W24V","price":19.0,"currency_code":"USD","in_stock":false},{"title":"Standard (20mm) \/ 80W \/ 48V","offer_id":45489485709524,"sku":"LUK2097STA80W48V","price":19.0,"currency_code":"USD","in_stock":true},{"title":"Standard (20mm) \/ 100W \/ 24V","offer_id":45489485742292,"sku":"LUK2098STA10024V","price":23.0,"currency_code":"USD","in_stock":true},{"title":"Standard (20mm) \/ 100W \/ 48V","offer_id":45489485775060,"sku":"LUK2099STA10048V","price":23.0,"currency_code":"USD","in_stock":false},{"title":"Standard (20mm) \/ 120W \/ 24V","offer_id":45489485807828,"sku":"LUK2100STA12024V","price":27.0,"currency_code":"USD","in_stock":false},{"title":"Standard (20mm) \/ 120W \/ 48V","offer_id":45489485840596,"sku":"LUK2101STA12048V","price":27.0,"currency_code":"USD","in_stock":true},{"title":"Supervolcano (47mm) \/ 80W \/ 24V","offer_id":45489486004436,"sku":"LUK2106SUP80W24V","price":19.0,"currency_code":"USD","in_stock":true},{"title":"Supervolcano (47mm) \/ 80W \/ 48V","offer_id":45489486037204,"sku":"LUK2107SUP80W48V","price":19.0,"currency_code":"USD","in_stock":false},{"title":"Supervolcano (47mm) \/ 100W \/ 24V","offer_id":45489486069972,"sku":"LUK2108SUP10024V","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Supervolcano (47mm) \/ 100W \/ 48V","offer_id":45489486102740,"sku":"LUK2109SUP10048V","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Supervolcano (47mm) \/ 120W \/ 24V","offer_id":45489486135508,"sku":"LUK2110SUP12024V","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Supervolcano (47mm) \/ 120W \/ 48V","offer_id":45489486168276,"sku":"LUK2111SUP12048V","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/high-wattage-cartridge-heaters-24v-48v-west3d-3d-printing-supplies-lukes-laboratory-129961.jpg?v=1724392794"},{"product_id":"replacement-heater-and-thermistor-for-bambu-p1-series-3d-printers","title":"Replacement Heater and Thermistor for Bambu P1 series 3D printers","description":"\u003cp\u003eThis is a stock drop in replacement thermistor and heater core for your Bambu P1 series printer. \u003c\/p\u003e\n\u003c!----\u003e","brand":"WEST3D","offers":[{"title":"Default Title","offer_id":45497460195540,"sku":"WES2128","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/replacement-heater-and-thermistor-for-bambu-p1-series-3d-printers-west3d-3d-printing-supplies-west3d-822125.jpg?v=1722725019"},{"product_id":"replacement-hotend-ceramic-heater-for-bambu-x1-series-3d-printers","title":"Replacement Hotend Ceramic Heater for Bambu X1 series 3D printers","description":"\u003cp\u003eThis is a stock drop in replacement thermistor and heater core for your Bambu P1 series printer. \u003c\/p\u003e\n\u003c!----\u003e","brand":"NA","offers":[{"title":"Default Title","offer_id":45497460359380,"sku":"WES2129","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/replacement-hotend-ceramic-heater-for-bambu-x1-series-3d-printers-west3d-3d-printing-supplies-west3d-826414.jpg?v=1722725019"},{"product_id":"replacement-hotend-thermistor-wire-for-bambu-x1-series-3d-printers","title":"Replacement Hotend Thermistor Wire for Bambu X1 series 3D printers","description":"\u003cp\u003eThis is a stock drop in replacement thermistor for Bambu X1 series printers. \u003c\/p\u003e\n\u003c!----\u003e","brand":"NA","offers":[{"title":"Default Title","offer_id":45511762870484,"sku":"WES2134","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/replacement-hotend-thermistor-wire-for-bambu-x1-series-3d-printers-west3d-3d-printing-supplies-west3d-305673.jpg?v=1723139388"},{"product_id":"trianglelab-rapido-ace-hotend-hot-end-hf-uhf-with-104nt-or-pt1000-thermistor","title":"TriangleLab Rapido ACE Hotend (Hot End) HF \/ UHF with 104NT or PT1000 Thermistor","description":"\u003cp\u003eOur friends over at TriangleLabs have taken the proven Rapido 2 hot end design and made its even better. This \u003cem\u003eisn't \u003c\/em\u003eyour typical Rapido!\u003c\/p\u003e\n\u003cp\u003eThis includes an embedded thermistor for greater precision in temperature readings and features a copper alloy 2-stage heatbreak. This model with the 2 stage insulated heatsink design prevents heat from the heat block screws being conducted further upwards and creating heat creep problems.\u003c\/p\u003e\n\u003cp\u003eThis hotend features a smaller heatsink but is still compatible with the Rapido or Dragon mounts on your printer. The rest fits the bill of the Rapido 2, with plaid copper parts, ceramic heater core, and copper nickel plated heat block. \u003c\/p\u003e\n\u003cp\u003eFrom our friends:\u003c\/p\u003e\n\u003cp data-key=\"77\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"78\"\u003e\u003cstrong data-slate-leaf=\"true\" data-slate-type=\"strong\"\u003e\u003cspan\u003eAbout Heatsink\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"81\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"82\"\u003eCarefully designed internal temperature sensor formore accurate and stable heater block temperature readings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"83\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"84\"\u003eThe tapered heatsink cooling section ensures effective and tight contact. The cold end of the heat breaker only comes into contact with the coldest top of the heatsink, ensuring that the cold end temperature of the heat breaker is as low as possible, reducing the likelihood of heat creep.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"85\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"218\"\u003e\u003c\/span\u003e\u003cspan data-slate-void=\"true\" data-key=\"86\"\u003e\u003cspan data-slate-spacer=\"true\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"217\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan data-key=\"86\" data-slate-type=\"span\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-img\"\u003e\u003cspan class=\"slate-node-img__span sc-bwzfXH eiqhKS\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S22587f7e2f2c44d1b88f6ead21cc1db9R.jpg\" class=\"img_loading\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"slate-node-text\" data-key=\"217\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"slate-node-text\" data-key=\"219\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"87\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"88\"\u003e\u003cstrong data-slate-leaf=\"true\" data-slate-type=\"strong\"\u003e\u003cu data-slate-leaf=\"true\" data-slate-type=\"u\"\u003e▉\u003c\/u\u003e\u003cspan\u003eAbout Flange Insulation\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"89\" data-slate-type=\"p\" data-style=\"{}\"\u003e \u003c\/p\u003e\n\u003cp data-key=\"91\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"92\"\u003eThe split stainless steel flange design reduces heat loss from the heating block and also reduces the potential for damage to the filament capillary path during tightening.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"93\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"221\"\u003e\u003c\/span\u003e\u003cspan data-slate-void=\"true\" data-key=\"94\"\u003e\u003cspan data-slate-spacer=\"true\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"220\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan data-key=\"94\" data-slate-type=\"span\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-img\"\u003e\u003cspan class=\"slate-node-img__span sc-bwzfXH eiqhKS\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S8b1f122c87de40729d899a0b54a721b6Z.jpg\" class=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"slate-node-text\" data-key=\"220\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"slate-node-text\" data-key=\"222\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"95\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"96\"\u003e\u003cstrong data-slate-leaf=\"true\" data-slate-type=\"strong\"\u003e\u003cu data-slate-leaf=\"true\" data-slate-type=\"u\"\u003e▉\u003c\/u\u003e\u003cspan\u003eEmbedded temperature sensor \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"97\" data-slate-type=\"p\" data-style=\"{}\"\u003e \u003c\/p\u003e\n\u003cp data-key=\"99\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"100\"\u003eIt can measure the temperature more accurately.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"101\" data-slate-type=\"p\" data-style=\"{}\"\u003e \u003c\/p\u003e\n\u003cp data-key=\"103\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"224\"\u003e\u003c\/span\u003e\u003cspan data-slate-void=\"true\" data-key=\"104\"\u003e\u003cspan data-slate-spacer=\"true\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"223\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan data-key=\"104\" data-slate-type=\"span\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-img\"\u003e\u003cspan class=\"slate-node-img__span sc-bwzfXH eiqhKS\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S25366a07c677406da5848da4e6e275b0F.jpg\" class=\"img_loading\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"slate-node-text\" data-key=\"223\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"slate-node-text\" data-key=\"225\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv data-key=\"105\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"106\"\u003e\u003cstrong data-slate-leaf=\"true\" data-slate-type=\"strong\"\u003e\u003cu data-slate-leaf=\"true\" data-slate-type=\"u\"\u003e▉Specification：\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-key=\"107\"\u003e\n\u003cspan class=\"slate-node-text\" data-key=\"226\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv data-key=\"108\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"109\"\u003eNominal resistance: 6.5 +-0.5Ω @25℃\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-key=\"110\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"111\"\u003eNominal power: 24V 88.6W\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-key=\"112\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"113\"\u003eTemperature vs Power \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-key=\"114\"\u003e\n\u003cspan class=\"slate-node-text\" data-key=\"228\"\u003e\u003c\/span\u003e\u003cspan data-slate-void=\"true\" data-key=\"115\"\u003e\u003cspan data-slate-spacer=\"true\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"227\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan data-key=\"115\" data-slate-type=\"span\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-img\"\u003e\u003cspan class=\"slate-node-img__span sc-bwzfXH eiqhKS\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S2021250a29ff4148849128b2bc266731m.jpg\" class=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"slate-node-text\" data-key=\"227\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"slate-node-text\" data-key=\"229\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv data-key=\"116\"\u003e\n\u003cspan class=\"slate-node-text\" data-key=\"230\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp data-key=\"117\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"118\"\u003e\u003cstrong data-slate-leaf=\"true\" data-slate-type=\"strong\"\u003e\u003cu data-slate-leaf=\"true\" data-slate-type=\"u\"\u003e▉Dimensions:\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"119\" data-slate-type=\"p\" data-style=\"{}\"\u003e \u003c\/p\u003e\n\u003cp data-key=\"121\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"232\"\u003e\u003c\/span\u003e\u003cspan data-slate-void=\"true\" data-key=\"122\"\u003e\u003cspan data-slate-spacer=\"true\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"231\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan data-key=\"122\" data-slate-type=\"span\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-img\"\u003e\u003cspan class=\"slate-node-img__span sc-bwzfXH eiqhKS\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S7fec73bd7a1347409acc22420d456d60u.jpg\" class=\"img_loading\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"slate-node-text\" data-key=\"231\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"slate-node-text\" data-key=\"123\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv data-key=\"124\"\u003e\n\u003cspan class=\"slate-node-text\" data-key=\"233\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp data-key=\"125\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"126\"\u003e\u003cstrong data-slate-leaf=\"true\" data-slate-type=\"strong\"\u003e\u003cu data-slate-leaf=\"true\" data-slate-type=\"u\"\u003e▉Test Report 01:\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"127\" data-slate-type=\"p\" data-style=\"{}\"\u003e \u003c\/p\u003e\n\u003cp data-key=\"129\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"130\"\u003eFor detailed documentation, please see the following link:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"131\" data-slate-type=\"p\" data-style=\"{}\"\u003e \u003c\/p\u003e\n\u003cp data-key=\"133\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan\u003e\u003cspan class=\"slate-node-text\" data-key=\"234\"\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/drive.google.com\/drive\/folders\/1JpKY0K64ezeTtLR7X6bPHKADfP-oV6TX\" data-slate-type=\"link\" data-emogine-form-component-dom-type=\"area\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"135\"\u003ehttps:\/\/drive.google.com\/drive\/folders\/1JpKY0K64ezeTtLR7X6bPHKADfP-oV6TX\u003c\/span\u003e\u003c\/a\u003e\u003cspan class=\"slate-node-text\" data-key=\"235\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"136\" data-slate-type=\"p\" data-style=\"{}\"\u003e \u003c\/p\u003e\n\u003cp data-key=\"138\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"139\"\u003e\u003cstrong data-slate-leaf=\"true\" data-slate-type=\"strong\"\u003e\u003cu data-slate-leaf=\"true\" data-slate-type=\"u\"\u003e▉\u003c\/u\u003e\u003cspan\u003eRapido Ace \u0026amp; Rapido Original Flowrate Comparison Test\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"140\" data-slate-type=\"p\" data-style=\"{}\"\u003e \u003c\/p\u003e\n\u003cp data-key=\"142\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"143\"\u003eIntroduction to the experiment:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"144\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"145\"\u003eThe model and slicing parameters close to the practicalization were used for this print comparison test. In order to facilitate the observation of the experiment The slicing software increases the speed from low to high at fixed height intervals, performs the printing and then records the maximum flow rate that can be achieved by both hot-end under exactly the same conditions by observing until the printing results are unacceptable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"146\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"147\"\u003eTest conditions:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"148\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"149\"\u003eSlicing software: PrusaSlicer 2.6.0\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"150\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"151\"\u003eModel: Flow Rate Test Geometry from E3D online (Figure 1)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"152\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"237\"\u003e\u003c\/span\u003e\u003cspan data-slate-void=\"true\" data-key=\"153\"\u003e\u003cspan data-slate-spacer=\"true\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"236\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan data-key=\"153\" data-slate-type=\"span\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-img\"\u003e\u003cspan class=\"slate-node-img__span sc-bwzfXH eiqhKS\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S1906475e2a6c4da8a1d0bf72a9a05793z.jpg\" class=\"img_loading\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"slate-node-text\" data-key=\"236\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"slate-node-text\" data-key=\"154\"\u003eNozzle V6 style brass 0.6mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"155\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"156\"\u003eSlicer settings:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"157\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"158\"\u003elayer height 0.3mm \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"159\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"160\"\u003eperimeter 1 \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"161\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"162\"\u003eextrusion width 0.75mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"163\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"164\"\u003ePETG@260°C\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"165\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"166\"\u003eSpeed For every 2mm increase in height, the speed increases by 5%.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"167\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"168\"\u003eFlow Rate Calculation Observe and record the maximum flow rate achieved before the print becomes unacceptable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"169\" data-slate-type=\"p\" data-style=\"{}\"\u003e \u003c\/p\u003e\n\u003cp data-key=\"171\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"172\"\u003e\u003cstrong data-slate-leaf=\"true\" data-slate-type=\"strong\"\u003eTest Results：\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"173\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"239\"\u003e\u003c\/span\u003e\u003cspan data-slate-void=\"true\" data-key=\"174\"\u003e\u003cspan data-slate-spacer=\"true\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"238\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan data-key=\"174\" data-slate-type=\"span\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-img\"\u003e\u003cspan class=\"slate-node-img__span sc-bwzfXH eiqhKS\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S5f66eda2e8a8476896043f3d9bd300713.jpg\" class=\"img_loading\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"slate-node-text\" data-key=\"238\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"slate-node-text\" data-key=\"175\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"177\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"178\"\u003e\u003cstrong data-slate-leaf=\"true\" data-slate-type=\"strong\"\u003e\u003cu data-slate-leaf=\"true\" data-slate-type=\"u\"\u003e▉Test Report 02:\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"179\" data-slate-type=\"p\" data-style=\"{}\"\u003e \u003c\/p\u003e\n\u003cp data-key=\"181\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"182\"\u003e\u003cstrong data-slate-leaf=\"true\" data-slate-type=\"strong\"\u003eRapido ACE \u0026amp; Rapido original heat breaker working temperature Comparison\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"183\" data-slate-type=\"p\" data-style=\"{}\"\u003e \u003c\/p\u003e\n\u003cp data-key=\"185\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"186\"\u003eExperimental overview:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"187\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"188\"\u003eIn the same fixed and heat dissipation conditions, the temperature difference between the two hot-end in the same position in the cold end of the heat breaker is compared and tested.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"189\" data-slate-type=\"p\" data-style=\"{}\"\u003e \u003c\/p\u003e\n\u003cp data-key=\"191\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"192\"\u003eTemperature measurement method: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"193\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"194\"\u003eMeasure the temperature inside the nozzle of the heater block with a thermocouple and compare it with the temperature set by the printer at that time, and record the actual temperature of the printer when the thermocouple measurement reaches 250 degrees Celsius to be used in the comparison experiment. For example, if the temperature inside the nozzle is 250 degrees Celsius when it is set and stabilized at 241 degrees Celsius in the printer, the hot-end will be set at 241 degrees Celsius in the next steps, and then the temperature will be measured again to confirm the stabilization, and then a comparative experiment will be conducted on this premise.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-key=\"195\" data-slate-type=\"p\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"241\"\u003e\u003c\/span\u003e\u003cspan data-slate-void=\"true\" data-key=\"196\"\u003e\u003cspan data-slate-spacer=\"true\"\u003e\u003cspan class=\"slate-node-text\" data-key=\"240\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan data-key=\"196\" data-slate-type=\"span\" data-style=\"{}\"\u003e\u003cspan class=\"slate-node-img\"\u003e\u003cspan class=\"slate-node-img__span sc-bwzfXH eiqhKS\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S1f11e2dc92e24dbdbc33905ad4317449f.jpg\" class=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"slate-node-text\" data-key=\"240\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"slate-node-text\" data-key=\"197\"\u003eConclusion The measured temperature at the critical cold end of the heat breaker of the TL Rapido Ace is significantly lower than that of the TL Rapido original. This means that the TL Rapido Ace has a better ability to block heat transfer and has a better thermal design, which can have the potential benefit of preventing thermal creep from occurring and reducing the chance of filament paths becoming clogged, thus improving print success rate.\u003c\/span\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Trianglelab","offers":[{"title":"104-NT (Standard) \/ High Flow","offer_id":45545880977620,"sku":"PHA2171","price":79.99,"currency_code":"USD","in_stock":true},{"title":"104-NT (Standard) \/ Ultra high-flow","offer_id":45545881010388,"sku":"PHA2172","price":84.99,"currency_code":"USD","in_stock":true},{"title":"PT1000 (Plus) \/ High Flow","offer_id":45545881043156,"sku":"PHA2173","price":84.99,"currency_code":"USD","in_stock":true},{"title":"PT1000 (Plus) \/ Ultra high-flow","offer_id":45545881075924,"sku":"PHA2174","price":94.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/trianglelab-rapido-ace-hotend-hot-end-hf-uhf-with-104nt-or-pt1000-thermistor-west3d-3d-printing-supplies-trianglelab-873276.webp?v=1724144552"},{"product_id":"hot-bed-kit-for-sovol-sv07-oem","title":"Hot Bed Kit (Build Plate Heater) for SOVOL SV07 (OEM)","description":"\u003ch2\u003e\u003cspan\u003eBuild Plate Heater for SV07\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003cstrong\u003e:\u003c\/strong\u003e \u003cbr\u003eAluminum bed heater (1 pcs)\u003cbr\u003eMagnetic sheet - installed on bed heater (1 pcs)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFits: \u003c\/strong\u003eSV07\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eDoes not include build plate\/print surface or mounting hardware.\u003c\/span\u003e\u003c\/p\u003e","brand":"SOVOL","offers":[{"title":"Default Title","offer_id":45772204146900,"sku":"SOV2301","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/hot-bed-kit-build-plate-heater-for-sovol-sv07-oem-west3d-3d-printing-supplies-sovol-5903307.jpg?v=1755603832"},{"product_id":"hot-bed-kit-build-plate-heater-for-sovol-sv07-plus-oem","title":"Hot Bed Kit (Build Plate Heater) for SOVOL SV07 Plus (OEM)","description":"\u003ch2\u003e\u003cspan\u003eBuild Plate Heater for SV07 Plus\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003cstrong\u003e:\u003c\/strong\u003e \u003cbr\u003eAluminum bed heater (1 pcs)\u003cbr\u003eMagnetic sheet - installed on bed heater (1 pcs)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFits: \u003c\/strong\u003eSV07 Plus\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eDoes not include build plate\/print surface or mounting hardware.\u003c\/span\u003e\u003c\/p\u003e","brand":"SOVOL","offers":[{"title":"Default Title","offer_id":45772208898260,"sku":"SOV2302","price":49.99,"currency_code":"USD","in_stock":false}]},{"product_id":"rapdio-2-ace-thermistor-104nt-and-pt1000","title":"Rapido 2 ACE - Thermistor 104NT and PT1000","description":"\u003cp\u003eThis thermistor is exclusively designed for the \u003ca href=\"https:\/\/west3d.com\/products\/trianglelab-rapido-ace-hotend-hot-end-hf-uhf-with-104nt-or-pt1000-thermistor?variant=45545880977620\"\u003eRapido 2 ACE\u003c\/a\u003e, which is available in both 104NT and PT1000 versions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"TriangleLab","offers":[{"title":"104NT","offer_id":45842724061396,"sku":"TRI2352104","price":9.99,"currency_code":"USD","in_stock":true},{"title":"PT1000","offer_id":45842724094164,"sku":"TRI2353PT1","price":14.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/rapido-2-ace-thermistor-104nt-and-pt1000-west3d-3d-printing-supplies-trianglelab-659629.jpg?v=1732265224"},{"product_id":"qidi-plus4-chamber-heater-and-fan-oem","title":"QIDI Plus4 Chamber Heater and Fan - OEM","description":"\u003cp data-sourcepos=\"3:1-3:92\"\u003eThis is the original chamber heater and fan for the Qidi Plus4. While we believe this will work in other setups, we recommend consulting a professional before attempting to install on another 3D printer.\u003c\/p\u003e","brand":"QIDI TECH","offers":[{"title":"Default Title","offer_id":45948671262932,"sku":"QID2477","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/qidi-plus4-chamber-heater-and-fan-oem-west3d-3d-printing-supplies-qidi-tech-272883.webp?v=1735579664"},{"product_id":"creality-ender-3-v2-hotbed-plate-oem-heater-with-connected-wire","title":"Creality Ender 3 V2 Hotbed Plate - OEM Heater with connected wire","description":"\u003cp\u003eDesigned specifically for the Ender 3 V2, this heater plate guarantees a reliable heating. \u003cbr\u003e\u003c\/p\u003e","brand":"Creality","offers":[{"title":"Default Title","offer_id":46111619449044,"sku":"CRE2579","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/creality-ender-3-v2-hotbed-plate-oem-heater-with-connected-wire-west3d-3d-printing-supplies-creality-978408.png?v=1740799269"},{"product_id":"creality-ender-5-hotbed-plate-oem-heater-with-connected-wire","title":"Creality Ender 5 \/ Ender 5 Pro Hotbed Plate - OEM Heater with connected wire","description":"\u003cp\u003eDesigned specifically for the Ender 5 \/ Ender 5 Pro, this heater plate guarantees a reliable heating. \u003cbr\u003e\u003c\/p\u003e","brand":"Creality","offers":[{"title":"Default Title","offer_id":46111621775572,"sku":"CRE2580","price":29.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/creality-ender-5-ender-5-pro-hotbed-plate-oem-heater-with-connected-wire-west3d-3d-printing-supplies-creality-226689.jpg?v=1740799267"},{"product_id":"phaetus-rapido-2-new-heat-block-with-thermistor-replacement-for-rapido-2-hot-ends","title":"Phaetus Rapido 2 New Heat Block with Thermistor Replacement for Rapido 2 Hot Ends","description":"\u003cp\u003e\u003cstrong\u003eThis is the updated block as of October 2024! This includes everything that changed, including the thermistor pre-installed (everything but the ceramic heater). \u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou broke it, it clogged, or vanished - either way we are here to help you fix it. This is a replacement heat block for the Rapido 2, both HF and UHF variants. The thermistor this comes up with is the PT1000 variant\u003c\/p\u003e","brand":"Phaetus","offers":[{"title":"Default Title","offer_id":46111631540436,"sku":"PHA2581","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/phaetus-rapido-2-new-heat-block-with-thermistor-replacement-for-rapido-2-hot-ends-west3d-3d-printing-supplies-phaetus-594194.jpg?v=1740799267"},{"product_id":"ceramic-heater-and-thermistor-replacement-for-qidi-plus-4-plus4","title":"Ceramic Heater and Thermistor Replacement for Qidi Plus 4 (Plus4)","description":"\u003cp\u003eThis is a stock OEM drop in replacement thermistor and heater core for your Qidi Plus 4 series printer. \u003c\/p\u003e\n\u003c!----\u003e","brand":"QIDI TECH","offers":[{"title":"Default Title","offer_id":46269695754452,"sku":"NA2785","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/ceramic-heater-and-thermistor-replacement-for-qidi-plus-4-plus4-west3d-3d-printing-supplies-qidi-tech-605024.jpg?v=1746678568"},{"product_id":"prusa-mk4-replacement-heater-thermistor-and-heat-block-complete-kit","title":"Prusa MK4 Replacement Heater Thermistor and Heat Block Complete Kit","description":"\u003cp\u003eThis is a complete replacement kit of the heater, thermistor, heat block, silicone sock, and tensioning screws for a Prusa MK4, designed based on OEM spec. \u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSpecification:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eItem Type: Hotend Heater Block Kit\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMaterial: Aluminum Alloy\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eHeating Cartridge: Approx. 6x12mm, 24V 40W, \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCable Length: Approx. 120mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThermistor: Approx. 3x8mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAluminum Heating Block Size: Approx. 21x13x13m\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":null,"offers":[{"title":"Default Title","offer_id":46343788101844,"sku":"N\/A2853","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/prusa-mk4-replacement-heater-thermistor-and-heat-block-complete-kit-west3d-3d-printing-supplies-na-883573.jpg?v=1748893118"},{"product_id":"prusa-mk4-replacement-heater-cartridge-104nt","title":"Prusa MK4 Replacement Thermistor (104NT) up to 300C","description":"\u003cp\u003eThis is a replacement OEM spec 104NT Thermistor Cartridge - providing accurate readings from -50-300C.  This comes with 2 replacement grub screws for your heat block as well. \u003c\/p\u003e","brand":null,"offers":[{"title":"Default Title","offer_id":46343893123284,"sku":"N\/A2855","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/prusa-mk4-replacement-thermistor-104nt-up-to-300c-west3d-3d-printing-supplies-na-240583.jpg?v=1750875932"},{"product_id":"prusa-mk4-replacement-heater-cartridge-40w","title":"Prusa MK4 Replacement Heater Cartridge 40w","description":"\u003cp\u003eThis is a replacement OEM spec heater cartridge.  This comes with a replacement grub screws for your heat block as well. \u003c\/p\u003e","brand":null,"offers":[{"title":"Default Title","offer_id":46343907246292,"sku":"N\/A2856","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/prusa-mk4-replacement-heater-cartridge-40w-west3d-3d-printing-supplies-na-139811.jpg?v=1750875932"},{"product_id":"goliath-hot-end-pt1000-oem-replacement-thermistor","title":"Goliath Hot End PT1000 OEM Replacement Thermistor","description":"\u003cp\u003eThis is the OEM thermistor replacement by Mellow for Goliath Hot Ends.\u003c\/p\u003e","brand":"Mellow","offers":[{"title":"Default Title","offer_id":46500793843924,"sku":"MEL3073WAT","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/goliath-hot-end-pt1000-oem-replacement-thermistor-west3d-3d-printing-supplies-mellow-3912211.png?v=1752698775"},{"product_id":"creality-k2-plus-upgraded-hot-end-with-ceramic-heater-4mm-nozzle","title":"Creality K2 Plus Upgraded Hot End with Ceramic Heater - .4mm nozzle","description":"\u003cp\u003e\u003cimg src=\"https:\/\/ueeshop.ly200-cdn.com\/u_file\/UPAT\/UPAT086\/2505\/30\/photo\/01.jpg\" class=\"\"\u003e\u003cimg src=\"https:\/\/ueeshop.ly200-cdn.com\/u_file\/UPAT\/UPAT086\/2505\/30\/photo\/02.jpg\" class=\"\"\u003e\u003cimg src=\"https:\/\/ueeshop.ly200-cdn.com\/u_file\/UPAT\/UPAT086\/2505\/30\/photo\/03.jpg\" class=\"\"\u003e\u003cimg src=\"https:\/\/ueeshop.ly200-cdn.com\/u_file\/UPAT\/UPAT086\/2505\/30\/photo\/04.jpg\" class=\"\"\u003e\u003cimg src=\"https:\/\/ueeshop.ly200-cdn.com\/u_file\/UPAT\/UPAT086\/2505\/30\/photo\/05.jpg\" class=\"\"\u003e\u003cimg src=\"https:\/\/ueeshop.ly200-cdn.com\/u_file\/UPAT\/UPAT086\/2505\/30\/photo\/06.jpg\" class=\"\"\u003e\u003cimg src=\"https:\/\/ueeshop.ly200-cdn.com\/u_file\/UPAT\/UPAT086\/2505\/30\/photo\/07.jpg\" class=\"\"\u003e\u003cimg src=\"https:\/\/ueeshop.ly200-cdn.com\/u_file\/UPAT\/UPAT086\/2505\/30\/photo\/08.jpg\" class=\"\"\u003e\u003cimg src=\"https:\/\/ueeshop.ly200-cdn.com\/u_file\/UPAT\/UPAT086\/2505\/30\/photo\/09.jpg\" class=\"\"\u003e\u003c\/p\u003e","brand":"TriangleLab","offers":[{"title":"Default Title","offer_id":46823756660948,"sku":"TRI3554","price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/creality-k2-plus-upgraded-hot-end-with-ceramic-heater-4mm-nozzle-west3d-3d-printing-supplies-trianglelab-9905702.jpg?v=1757067492"},{"product_id":"phaetus-conch-hot-end-for-qidi-plus-4","title":"Phaetus Conch Hot End for Qidi Plus 4 (Various Nozzle Diameters) - Fully Complete with Heater and Thermistor Installed","description":"\u003c!-- Simple, theme-agnostic product content --\u003e\n\u003cstyle\u003e\n  .product-content img { display:block; width:100%; height:auto; margin:0 0 16px; }\n  .product-content p { margin: 0 0 16px; }\n\u003c\/style\u003e\n\u003cdiv class=\"product-content\"\u003e\n\u003cp\u003eThis is a fantastic upgrade to your Plus 4 — which, while a great printer, is also great at breaking the heatbreak spacer (often requiring a whole new hot end). This one should solve that issue while providing fantastic flow rates.\u003c\/p\u003e\n\u003c!-- HERO (this was missing before) --\u003e \u003cimg src=\"https:\/\/www.phaetus.com\/cdn\/shop\/files\/qidi-1.png?v=1756433627\u0026amp;width=3840\" alt=\"Conch Hotend® – Perfect Fit for QIDI Plus4 (Hero)\"\u003e \u003c!-- Rest of the panels from the Phaetus page --\u003e \u003cimg src=\"https:\/\/www.phaetus.com\/cdn\/shop\/files\/qidi-2.png?v=1756433641\u0026amp;width=3840\" alt=\"\"\u003e \u003cimg src=\"https:\/\/www.phaetus.com\/cdn\/shop\/files\/qidi-3.png?v=1756433650\u0026amp;width=3840\" alt=\"\"\u003e \u003cimg src=\"https:\/\/www.phaetus.com\/cdn\/shop\/files\/qidi-4.png?v=1756433637\u0026amp;width=3840\" alt=\"\"\u003e \u003cimg src=\"https:\/\/www.phaetus.com\/cdn\/shop\/files\/qidi-5.png?v=1756433680\u0026amp;width=3840\" alt=\"\"\u003e \u003cimg src=\"https:\/\/www.phaetus.com\/cdn\/shop\/files\/qidi-6.png?v=1756433654\u0026amp;width=3840\" alt=\"\"\u003e \u003cimg src=\"https:\/\/www.phaetus.com\/cdn\/shop\/files\/qidi-7.png?v=1756433662\u0026amp;width=3840\" alt=\"\"\u003e \u003cimg src=\"https:\/\/www.phaetus.com\/cdn\/shop\/files\/qidi-8.png?v=1756433694\u0026amp;width=3840\" alt=\"\"\u003e \u003cimg src=\"https:\/\/www.phaetus.com\/cdn\/shop\/files\/qidi-9.png?v=1756433646\u0026amp;width=3840\" alt=\"\"\u003e \u003cimg src=\"https:\/\/www.phaetus.com\/cdn\/shop\/files\/qidi-10.png?v=1756433674\u0026amp;width=3840\" alt=\"\"\u003e \u003cimg src=\"https:\/\/www.phaetus.com\/cdn\/shop\/files\/qidi-11.png?v=1756433686\u0026amp;width=3840\" alt=\"\"\u003e \u003cimg src=\"https:\/\/www.phaetus.com\/cdn\/shop\/files\/qidi-12.png?v=1756433705\u0026amp;width=3840\" alt=\"\"\u003e \u003cimg src=\"https:\/\/www.phaetus.com\/cdn\/shop\/files\/qidi-13.png?v=1756433666\u0026amp;width=3840\" alt=\"\"\u003e \u003cimg src=\"https:\/\/www.phaetus.com\/cdn\/shop\/files\/qidi-14.png?v=1756433705\u0026amp;width=3840\" alt=\"\"\u003e \u003cimg src=\"https:\/\/www.phaetus.com\/cdn\/shop\/files\/qidi-15.png?v=1756433689\u0026amp;width=3840\" alt=\"\"\u003e \u003cimg src=\"https:\/\/www.phaetus.com\/cdn\/shop\/files\/qidi-16.png?v=1756433704\u0026amp;width=3840\" alt=\"\"\u003e\n\u003c\/div\u003e","brand":"Phaetus","offers":[{"title":".2mm","offer_id":46995572523220,"sku":"PHA3658.2M","price":27.99,"currency_code":"USD","in_stock":true},{"title":".4mm","offer_id":46995569639636,"sku":"PHA3650CON.4MHOT","price":27.99,"currency_code":"USD","in_stock":true},{"title":".6mm","offer_id":46995569672404,"sku":"PHA3651CON.6MHOT","price":27.99,"currency_code":"USD","in_stock":true},{"title":".8mm","offer_id":46995572555988,"sku":"PHA3659.8M","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/0692\/5480\/files\/phaetus-conch-hot-end-for-qidi-plus-4-various-nozzle-diameters-fully-complete-with-heater-and-thermistor-installed-west3d-3d-printing-supplies-phaetus-9259418.webp?v=1759612287"}],"url":"https:\/\/west3d.com\/en-au\/collections\/heaters.oembed?page=3","provider":"West3D 3D Printing Supplies","version":"1.0","type":"link"}