Description
Note: If you wish to use different fan voltages than would be standard you want the ERCF version, which we sell here.
The board has:
- BAT85 Diode for abl probe
- Indicator LED to show when hotend is on
- 2/3/4 pin headers for most components on the toolhead
- 2 Pin Microfit 3.0 for the heater
- 0805 pkg thermistor to be used as a chamber temperature
- 14 Pin Microfit 3.0 for the main connector back to the MCU
- the main wiring harness connector is Here
- 20awg should be fine for 24v, GND, and HE0 and 24awg for everything else
This board was designed to make wiring the toolhead a bit easier, to help get rid of some of the crimps needs on these wires.
Since this board has provisions for the X endstop, this should be compatible with V1, V2, and Switchwire
Additional Information can be found here.