Beschreibung
Introducing the best d*mn fasteners in mini-kits. Keep the screw monsters at bay with extras, and the right screws to get the job done. No, these aren't your Home Depot or Ace Hardware puny screws, these are our signature BDF fasteners.
For more information about these idlers see the github link here.
We offer both Front and Z Idlers - this listing in for a V2.4.
What they are (Front Idlers):
These are replacement front idlers for Vorons (and Voron-based machines) designed with one core principle: use belt tension to compress printed layers instead of splitting or pulling them apart.
Bill of Materials for the Front Idlers
| Description | Quantity | Material |
| M5x40 SHCS | 5 | SS304 |
| M5 Hex Nut | 5 | SS304 |
| 5x18mm Pin | 3 | SS304 |
| M5x30 BHCS | 5 | SS304 |
| M3 Roll-In for 2020 Extrusion | 3 | Nickel Plated Steel |
| M3x16 BHCS | 3 | SS304 |
In addition to the kit above, you will reuse the same shim/bearing stack setup for each idler as the original V2.4
What they are (Z Idlers):
The same carriage design has also been applied to work with Micron, Voron 2.4, and Doomcube Z idlers.
Bill of Materials for the Z Idlers
| Description | Quantity | Material |
| M5 Hex Nut | 10 | SS304 |
| M5x40 SHCS | 10 | SS304 |
| 5x22mm Pin | 5 | SS304 |
In addition you'll reuse the existing M5×30 BHCS and roll-in M5 nuts for mounting to the frame, as well as the 20T toothed idlers from the original stock Z idlers.