E3D Revo™ Voron Edition RapidChange Hot End (Revo Voron) Builder

E3DSKU: RevoVoron-Starter12V

Hot Side: Starter 12V 104NT
Preis:
Sonderpreis€81,95

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Beschreibung

Introducing the new E3D Configurable Revo-lution! A Revo Kit contains a cold-side and a hot-side. With our builder you can order all of these in one place. 

Configurator Hot Side packs contain 5 package types (Starter, High Flow, High Flow X, Genius 400 and Genius Metal). Each package type contains the following:

  • Starter:

  1. 0.4mm Brass Nozzle
  2. 0.6mm Brass Nozzle
  3. 40W HeaterCore
  • High Flow:

  1. 0.4mm Brass High Flow Nozzle
  2. 0.6mm Brass High Flow Nozzle
  3. 60W HeaterCore
  4. BONUS 0.4mm Brass Nozzle
  5. BONUS Revo Sock Pack
  • High Flow X:

  1. 0.4mm ObXidian High Flow Nozzle
  2. 0.6mm ObXidian High Flow Nozzle
  3. 60W HeaterCore
  4. BONUS 0.4mm Brass Nozzle
  5. BONUS Revo Sock Pack
  • Genius 400:

  1. 0.4mm ObXidian Nozzle
  2. 0.6mm High Flow ObXidian Nozzle
  3. 0.4mm Brass Non Planar Nozzle
  4. 0.6mm HighTemperature (HT) Abrasive Nozzle
  5. 60W HeaterCore
  6. HT HotSide HP Heater
  7. BONUS 0.25mm Brass Nozzle
  8. BONUS Revo Sock Pack
  • Genius Metal:

  1. 0.4mm ObXidian Nozzle
  2. 0.6mm High Flow ObXidian Nozzle
  3. 0.4mm Brass Non Planar Nozzle
  4. 0.6mm HighTemperature (HT) Abrasive Nozzle
  5. 0.4mm DiamondBack Nozzle
  6. 60W HeaterCore
  7. HT HotSide HP Heater
  8. BONUS 0.25mm Brass Nozzle
  9. BONUS Revo Sock Pack

Other E3D Revo products giving you even more choice:

Complete Hot End Builders:

Revo Voron Builder Revo Six Builder Revo Hemera Builder
Revo Prusa Builder Revo Roto Builder Revo Creality Builder
Revo LGX Micro Builder



E3D developed this Revo-compatible cold side in collaboration with Team Voron. It’s intended for use with the Voron StealthBurner, which includes an integrated cold side fan. It’s compatible with our Revo ecosystem, so you can change nozzle size without tools or hot tightening using just your fingers.

  • Uses Revo Nozzles – change nozzles cold, no tools, no hot tightening
  • Works with a Revo HeaterCore for faster heat-ups
  • Rigid mounting using 4 x M3 x 0.5 bolts
  • Ultra-lightweight construction for improved speed performance
  • Ideal HotEnd for Voron StealthBurner
  • Heatsink is licensed under GPL V3
  • Compatible with Voron Afterburner/Stealthburner, Legacy, Switchwire, Trident, Voron 0, Voron 1, Voron 2

Ready for Revo. A groove at the bottom of the sink accepts a Revo HeaterCore spring. It’s compatible with our Revo ecosystem, so you can change nozzle without tools or hot tightening using just your fingers.

Complements your Voron. Includes an anodised red aluminium heatsink to complement your Voron accented parts.

Rigid mounting. This is a rigid mounted design that uses four M3 x 0.5 bolts to secure to your Voron 3D printer.

Open-source design. We’ve made this cold side (everything above the HeaterCore, including the receptacle for the Revo Nozzle) open hardware licensed under the GPL V3. This means if you have an alternative design for this, you are able to work with it.

See it in action:


Please note:

- For full mounting instructions and STL files for Voron printed parts visit: https://docs.vorondesign.com/ 

- You may need to adjust your Z offset when changing nozzles.

You may also like

Recently viewed