Description
The Yeh:
This 3D Printer is extremely fast and leverages a linear rail motion system
The T300 has a large 300x300x350 (xyz) build volume
This 3D Printer uses Klipper Firmware
This 3D Printer comes mostly assembled and is simple to put together
This 3D Printer packs a good price (medium)/performance(high) ratio
This 3D Printer has auto bed leveling which will make your life so much easier
The T300 has great overhang performance leveraging a high power 5025 part cooling fan
The Meh:
This printer is not enclosed and therefore is not intended to be used with filaments that need to be printed in an enclosed chamber (e.g. Nylons, Polycarbonates etc.)
While priced competitively for its performance we prefer CoreXY printers which you can have for a little bit more (e.g. the Sovol SV08)
The Verdict:
This is a great printer if you want to push performance
COMGROW T300
Intelligent Core Based on Klipper
The T300 optimizes a 64-bit microcomputer with Klipper, not only significantly improving computational speed but also greatly enhancing printing speed and quality through pressure advance and input shaping.
Reliable Filament Extrusion
The T300 features a 6.5:1 gear ratio for more precise material control, allowing for more accurate printing of flexible materials and stronger dual-gear extrusion grip.
-
Perfectly Balanced Print Area
Maintaining the capability to print models encompassing 90% or more of its total build volume. It features a smaller and lighter heated bed compared to the T500, which reduces limitations on print speed and acceleration.
Rapid Filament Cooling
A 5025 high-speed fan spinning at 8500 rpm provides strong airflow, combined with a circular duct piece, concentrating the air better around the extruded filament, and enhancing cooling efficiency.
30s Heating
Long minutes of heating time are a thing of the past; with the T300, there's less waiting time and more printing fun.
4.3' Touch Screen
- The T300 uses a 4.3-inch high-refresh-rate touchscreen with a resolution of 480*272 and a viewing angle of 85 degrees. It features a simple and user-friendly UI that makes operation convenient and provides a smooth visual experience.
81-point Auto Leveling
- Auto-leveling ensures the flatness of the heated bed, allowing for a perfect first layer without effort. The build plate automatically heats up before auto-leveling to match the actual printing flatness.
