Description
West3D's Stainless Steel Fastener kit for Voron V0.2 comes with all the fasteners (and extras of each in case a the screw monster eats one) you could need for your Voron build. If you want the best damn fastener ("BDF") kit on the market, that won't make that beast of a printer you're building cry when its covered in rust, this is the kit you need.
Below are a list of parts included, their quantities and associated material. Please note, from time to time we update our kits based on user feedback or changes in the BOM.
| Description | BOM Quantity | Quantity |
| 6x3 0.5mm Thick Shim Washer | 50 | 55 |
| M2 Nut | 55 | 65 |
| M3 Nut | 140 | 145 |
| M2x6 SHCS | 60 | 75 |
| M2x6 FHCS | 10 | 12 |
| M2x8 SHCS | 10 | 12 |
| M3x8 BHCS | 115 | 125 |
| M3x8 FHCS | 5 | 7 |
| M3x10 BHCS | 50 | 55 |
| M3x12 BHCS | 25 | 28 |
| M3x16 BHCS | 10 | 12 |
| M3x25 BHCS | 10 | 12 |
| M3x30 BHCS | 10 | 12 |
| M3x35 BHCS | 25 | 33 |
| M3x40 BHCS | 10 | 12 |
| M2x10 Self Tapping Screws for Plastic | 30 | 34 |
| M3 Brass Heatset Inserts - Short M3x5x4 | 50 | 55 |
| M3x6 BHCS | 40 | 45 |
| Makerbeam XL Nut | 2 | 3 |
If you also need a hex key set, we've got you covered. See our set here.
Please follow recommendations for the best threadlocker application for your use (Loctite® Threadlocker Blue 242 is what we recommend).