BERSERKER VINDR Ultra-Performance 3010 Axial Fan 24V 3010A-24V-A 30x10mm

BerserkerSKU: BER2186PWM

Price:
Sale price€8,95

Customer Reviews

Based on 3 reviews
67%
(2)
0%
(0)
33%
(1)
0%
(0)
0%
(0)
M
Max Lozovoi
Best performing fan in 3010 size

Not all fans are made equal. This one performs much better than the others 3010 I've tried. So, guess West3D statement that it outperforms other 3010s is pretty fair. At least that matches my experience.

R
R.G.
Works Great! Remember to use diode on tach pin.

I had fans from other brands die quickly from high temperatures but this one works like a champ. Remember to put the a diode with the band facing the fan on the tach pin if not using a dedicated tach port or you could kill your fan (applies to EBB36)

S
Spain Sivley
Ordered two, two quit working.

One fan worked for about 2 weeks before it started seizing. The other just wouldn't accept 24v. Hooked it up to my variable psu and it turns at 10v, but seizes at anything higher when testing as a standard 2 pin. Could be user error, but this is my experience. Using an ebb36 and tested at 24v / multimetered.

Description

Taking inspiration from two thousand years of viking shipbuilding, which when aided by strong vindr were the fastest in the world,  BERSERKER - the brand representing unparalleled quality introduces its newest line of 3D printer components, Vindr (Norse for "Wind") Fans. These fans were diligently sourced and each fan in the lineup have been tested to outperform any readily available fan on the market today (this fan performed 35% better than the performance fan we tested). These are designed to withstand high temperature environments, with an Insulation Class F rating (155C).

These fans have a dedicated tachometer / speed controller line. These give you control and visibility over the performance of your fan, use standard hardware controlled PWM and unlike some that only give you an alarm line (tells you the fan is dead) - this allows you to monitor RPM and control what happens when things are not as expected (e.g. if RPM drops significantly you can safely pause your printer, kill power to your hotend and avoid a crazy bout of heat creep). Don't have a signal pin? Just cut the wire and it will operate as a standard PWM-able 2-pin fan. 

Specs:

Current: DC

Voltage: 24V

CFM: 4

Bearing: Dual Ball

Wire: 3-wire 300mm length

Speed: 10000 RPM +/-5%

Insulation Class: F (155C)

Please note, with all fans, the longer you operate in a high temperature environment, the higher the wear and shorter the life is expected.

You may also like

Recently viewed