Beschreibung
The Creality K1 is a great printer, and we are carrying a great nozzle - both in terms of value as well as quality. This nozzle being plated copper has almost 3 times the thermal conductivity as brass, meaning it'll print at lower temps (or at the same temps, but with more flow!).
These nozzles are also great for abrasive printing, such as filament with infills (e.g. PLA-CF), glitter, glow in the dark etc. This nozzle is rated for temperatures that'll melt your pants off at 500C you can print just about anything!
Cross-Sections
The cross-sections of some products have not been processed. If you do not believe our photos, please cut our products and you will witness our high-quality workmanship.
Features
1.Insert is Hardened Steel DLC Coatings Diamond-Like Carbon
material is very resistant to wear and tear.Printable with carbon fibre filled filament.
2.Body is Copper Alloy Nickel plating
Copper has more than 3x the thermal conductivity of brass.The higher thermal conductivity.It perfect for the high-temperature printing that other nozzles can't handle.
Smooth
The inner wall is verysmooth,reduce blocking.
Details
Nozzles are identifiable with markings on the flats of the hex head, please see the table below for identification.
Nozzles are identifiable with markings on the flats of the hex head, please see the table below for identification.
Size
Experimental Comparison
Volumetric Flow Rate:(mm3/s)
Filament: PLA220°C
Slicer: Prusaslicer
Nozzle: 0.6mm
Hotend: Dragon HF
