PL-08N2 Inductive Probe - West3D Printing - ZHONGDE
PL-08N2 Inductive Probe - West3D Printing - ZHONGDE
PL-08N2 Inductive Probe - West3D Printing - ZHONGDE
Zum Zoomen über das Bild scrollen Klicke zum Zoomen auf das Bild
PL-08N2 Inductive Probe - West3D Printing - ZHONGDEPL-08N2 Inductive Probe - West3D Printing - ZHONGDEPL-08N2 Inductive Probe - West3D Printing - ZHONGDE

PL-08N2 Inductive Probe

ZHONGDESKU: ZHO0069
Preis:
€5,95

Customer Reviews

Based on 2 reviews
0%
(0)
0%
(0)
0%
(0)
50%
(1)
50%
(1)
b
brendanm720
Budget Option, Won't Last Forever

This probe works fine for a while, but will not last you forever.

Mine died after about 360 Hours -- I'm kind of thinking that the heat got it.

If the inductive probe is the route you are going, then go straight to the Omron TL-Q5MC2-Z from here on the West3D website. If you've got PIF printed parts and are moving to Tap or Klicky, then get this one and the appropriate hardware kit.

J
James Hope
Inaccurate and Unusable

This probe works but is extremely inaccurate. I was getting ranges of 0.1 or more on klipper's probe_accuracy test, and over 0.025 is not accurate enough.

Hi James, I’m sorry this didn’t work out for you. This is the BOM spec inductive probe that was called for in the Voron sourcing guide. That said we have progressed into other variations of probes that we agree generally perform much better (eg Klicky, Tap).

Thank you for sharing your experience, if you need any support please reach out to us at info@west3d.com we will do our best to support.

Beschreibung

Compatible with Voron printers (V1, V2, not switchwire), and others to support bed leveling. 

6-36V DC

Sensing distance: 8mm

Dimensions: 17mm x 17mm x35mm 

You may also like

Recently viewed