Phaetus aeForce PET-GF 15% Glass Filled PET 3D Printer Filament 1KG 1.75mm

This filament prints great at 320C nozzle, 80C bed, and under 55C chamber (open air is fine!), I use the same print speeds as ABS/ASA, and give it all the fan you can. After printing you need to anneal it in an air fryer/toaster oven to get the full performance, but then it makes great printer parts that will handle chamber temps better than ABS without creeping. Layer adhesion is amazing.

To keep it dry, you need to dry at ~90C and use molecular sieve instead of regular desiccant, this stuff will pull moisture straight out of the regular stuff.

Great stuff but it required longer drying than anticipated. Prints great after drying for more than 24 hours. Originally I tried 12 but it wasnt enough had to try for 24 hours before use. It also prints on the slower side.