West3D's Undertaker Tungsten Carbide Nozzle (V6, Volcano, Bambu, MK8, K1)

WEST3DSKU: WES0641

Nozzle Style: V6 (standard hot ends)
Nozzle Diameter: 0.8
Price:
Sale price$44.99

Customer Reviews

Based on 33 reviews
94%
(31)
3%
(1)
0%
(0)
3%
(1)
0%
(0)
H
Hawky-z
Like a hot knife through butter

After destroying several nozzles with carbon fiber filled filaments I finally had enough and got an Undertaker. It's a world of difference from the cheap hardened steel and plated copper nozzles I was using! Plus it has enough tip surface area that I can lay down perfect 0.9mm lines with a 0.4mm tip!

J
Jeerkahn
Maybe not the last nozzle you'll ever need, but REALLY close

I've used these on 2 printers so far, the volcano worked great. Since building my Voron I've switched to the normal sized nozzle and it's been running like a champ. I've printed everything with it, no exotics but it handles PLA, ABS, PETG, Silks, Glow in the Dark and wood without any problems. No wear and holds heat like my original brass nozzles. A PID tune after swapping to it and barring anything disastrous you never need to change for anything than preference. Great product and well worth the money. I purchased the .4 and .6 for the larger itmes.

M
M.A.
It Prints Things

Verris made me review it like this

No but really awesome nozzles. buy one. you wont be upset

Description

PLEASE NOTE: V6 .4mm, 1mm, 1.2mm and MK8 .4mm nozzles are considered pre-sale and are expected to arrive the first week of November. We are listing them to take advantage of our Halloween Sale, but you should expect them to ship in early November. 

Availability of our signature nozzle box is limited. If you wish to receive the nozzle box please indicate this in your order notes- it may extend lead times. For your convenience we include at the bottom of this page links to the STL files along with general printing instructions.


Lay your other nozzles to rest with the one nozzle that may just outlive you. The Undertaker Nozzle is full body K20 Grade Tungsten Carbide, no inserts - we didn't stop at just the tip and we didn't use any other materials. This is a V6 style nozzle.

When we set out to develop our own nozzle, we knew right away what it had to be. Tungsten Carbide is one of the hardest materials on earth (9 Mohs), has the thermal conductivity of Brass and very low thermal expansion. This nozzle will survive abrasives and anything your printer can throw at it. 

We do not carry hardened steel nozzles because we believe this is truly superior in every way. For the most part, unlike steel nozzles which have relatively low thermal conductivity, you can swap out your brass nozzle for the Undertaker and keep your printer profiles unchanged!

The V6 Style nozzle works with most standard hot ends (non Creality/MK8 style)

The MK8 Style nozzle works with many non K1 style Creality printers such as the CR10 / Ender etc.

The Bambu Style works with most aftermarket Bambu Style hot ends (e.g. TZ2) that have a removable nozzle.

The K1 Volcano Style works on Creality K1 / Comgrow T300 (with removable nozzle) / Sovol SV08 (with removable nozzle) or other printers that use this style nozzle.

Source: https://try3dp.altervista.org/en/nozzle-materials/

 Nozzle boxes are printed in three parts: The bottom, the spring and the top. The bottom and spring are a solid color of black with glitter (Such as Ambrosia Galactic Black) or marble filament (we use Atomic Marble). The top/lid piece is printed in two colors with a layer based tool head change (we print at .3mm layer height and use the alternate color on layer 3 and 4 before changing back to the primary color). For black boxes we use the same black used for the bottom and spring, with neon green as the alternative. For marble boxes we use the black glitter filament.

With these files you are free to experiment with your own colors, however we ask that you maintain the general appearance with the sunken 3D logo.

Box Bottom

Box Spring

Box Top

Alternative Insert (no spring, fits 3 nozzles)

 

 

You may also like

Recently viewed