Description
PHA is a biopolymer made from natural materials. It looks, feels, and works just like plastic — but unlike other plastics it’s environmentally safe and leaves zero microplastics behind.
Our Gen 2 PHA filament formula improves mechanical properties so there’s no need to compromise between quality and sustainability. Now makers can get high-quality precision prints that are smooth, consistent, and eco-friendly every time.
Here are the reasons PHA is a great alternative to PLA and other plastic filaments when it comes to 3D printing.
Recyclable, compostable, and biodegradable: Our PHA filament is recyclable, compostable, and biodegradable under all conditions. This means that it can be safely placed in a home compost bin along with food and waste. And even in the worst-case scenario, if it ends up in landfills or our oceans, it will naturally biodegrade.
Quality Performance: Improved bed and layer adhesion and overhang, while decreasing die swelling, ensuring more accurate and consistent prints.
Easy to use: Clog-free, bubble-free formula with low warpage and shrinkage, guaranteeing smooth prints for every project.
Specifications
Materials: PHA
Diameter: 1.75mm (±0.1mm)
Density: 1.33g/cm3
Glass Transition Temp: -9.3
-
PRODUCT SPECIFICATIONS
• Nominal Diameter: 1.75 mm
• Diameter Tolerances: ± 0.1 mm
• Ovality: Less than 95%
• Net Weight: 600g/1kg
• Shore Hardness: 70D
MATERIAL TECHNICAL DATA SHEET
Density
• Value: 1.33 g/mL
• Standard: Beyond Plastic
• Condition:
MFR
• Value: 10 g/10 min
• Standard: ASTM D1238
• Condition: 190 °C/2.16 kg
Max Breaking Force
• Value: 712 N
• Standard: ASTM D638
• Condition: 1 mm/min
Elongation at Break
• Value: 5%
• Standard: ASTM D638
• Condition: 1 mm/min
Young's Modulus
• Value: 2,137 MPa
• Standard: ASTM D638
• Condition: 1 mm/min
Melting Temperature
• Value: 170 °C
• Standard: Beyond Plastic
• Condition: 10 °C/min
Glass Transition
• Value: -9.3 °C
• Standard: Beyond Plastic
• Condition: 10 °C/min
Thermal Degradation
• Value: 255 °C
• Standard: Beyond Plastic
• Condition: 10 °C/min
Spool Diameter
• Spool diameter: 200 mm
• Spool depth: 58 mm
• Hub diameter: 83 mm
• Hub hole diameter: 53 mm
Recommended Printer Setup
• Extrusion temperature: 195±10
• Print Fan: On (100% after 1st layer)
• Bed temperature: off (0°C)
• Bed Addition: PVOH Glue
• Brim Width: 10-15mm
• Brim Separation Gap: 0mm
• Printing speed: 20~30 mm/s
• Dryer: Material is hydroscopic but at low percentage (0.03%). Will dry very quickly if necessary.