Beschreibung
Taking inspiration from two thousand years of viking shipbuilding, which when aided by strong vindr were the fastest in the world, BERSERKER - the brand representing unparalleled quality introduces its newest line of 3D printer components, Vindr (Norse for "Wind") Fans. These fans were diligently sourced and each fan in the lineup have been tested to outperform any readily available fan on the market today (this fan performed 35% better than the performance fan we tested). These are designed to withstand high temperature environments, with an Insulation Class F rating (155C).
For applications like Stealthburner, the housing of our fans may need to be sanded to remove some thickness from the shell (our casing is heavier duty than generic 5015 fans). You'll be happy you did.
There’s a non PWM version and a PWM version (Both of these have 2 wires, One red-one black). Please note the non-PWM version does not allow you to control fan speed, it’ll be blowing air at full blast when turned on (or won’t when power is below ~90%). This version is cheaper, and is great for applications such as nevermore or bed fans.
Specs:
Current: DC
Voltage: 24V
Amps: .13A
CFM: 6.1
Max Static Pressure: 39.97 MmH20
Bearing: Dual Ball
Wire: 2-wire 300mm length
Speed: 8500 RPM +/-10%
Insulation Class: F (155C)
Please note, with all fans, the longer you operate in a high temperature environment, the higher the wear and shorter the life is expected.