Beschreibung
This is the Nevermore StealthMax, the biggest and meanest DIY carbon filtration system designed specifically for 3D printers. This product is provided by the thoughtful design of 0ndsk4. For details about the product visit: https://github.com/nevermore3d/StealthMax
Please note - this is a complete kit of parts to build a Nevermore StealthMax except for the actual carbon medium and printed parts, you'll need to do that. If you need the carbon we sell Nevermore Carbon here.
Required bed size is at least 300x300 (StealthMax)
The Nevermore StealthMax is an air filter developed specifically for 3D printers. It uses activated carbon and HEPA filters, designed to filter and absorb harmful fumes and unpleasant odors generated when plastics are melted, creating a safer and more comfortable environment for users, purifying the air and protecting health.
1) The interior is filled with 4mm columnar activated carbon, which can effectively absorb harmful gases such as volatile organic compounds (VOC);
2) It is also equipped with a HEPA (High Efficiency Particulate Air) filter, which can effectively capture tiny particles with a diameter of 2.5 microns and below (usually much smaller in 3D printing) and filter the tiny particles generated during the printing process;
3) The use of Raspberry Pi Pico W Wifi wireless module makes installation and operation simpler and more convenient;
4) Add a 12V step-down module. The device can be directly powered by 24V without a separate 12V power supply;
5) Each module has been soldered with pin headers and circuits, and can be plugged in and used directly without re-soldering.
