Umbilical Toolhead Harness (Toolhead to Frame PCB) 14-pin
Zum Zoomen über das Bild scrollen Klicke zum Zoomen auf das Bild
Umbilical Toolhead Harness (Toolhead to Frame PCB) 14-pin

Umbilical Toolhead Harness (Toolhead to Frame PCB) 14-pin

West3D PrintingSKU: WES0919
Preis:
€13,95

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
James Schaible

This was perfect! Exactly what I needed.

B
Brian Falor
Fixed my problem!

I originally bought a cheap umbilical cable off of Amazon, and I had all kinds of problems with my printer. Thermistor was constantly spiking and giving crazy readings, fans wouldn't turn in other times. It was all super frustrating. I took apart my printer to try to diagnose the problem, and that did help. I reflowed the solder on my umbilical boards and that didn't do anything. Finally I swapped out the crappy umbilical cable for this one and now I'm back in business. Highly recommend!

S
Sean Day

Nice looking and working wires.. replaced the non working onese I got elsewhere

Beschreibung

This mod adds two PCBs (Frame PCB, Toolhead PCB) and a cable (Umbilical Cable, listed here) to the V0.1 that can aid in wire management and routing as well as making the toolhead able to be swappable. 

This is the 14-pin Umbilical cable that connect the Frame and Toolhead PCBs together. We have sourced this using 20AWG UL1332 (200C 300V) wire, neatly wrapped in a cable loom that terminates neatly into heatshrink. Pin-to-Pin measurement is 240mm.

This mod was designed by Tim Abraham (timmit99) and open sourced, you can find additional information here. 

You may also like

Recently viewed