West3D's Stainless Steel Fastener kit for the Micron comes with all the fasteners (and extras of each in case a the screw monster eats one) you could need for your build. If you want the best damn fastener ("BDF") kit on the market, that won't make that beast of a printer you're building cry when its covered in rust, this is the kit you need.
If you also need a hex key set, we've got you covered. See our set here.
Please follow recommendations for the best threadlocker application for your use (Loctite® Threadlocker Blue 242 is what we recommend).
Below are a list of parts included, their quantities and associated material.
| Description |
Quantity |
Material |
| M3 Heatset Insert |
120 |
Brass |
| M3x6 pointed grubscrew |
22 |
Stainless Steel 304, cone point |
| M2x10 Self Tapping Screw |
20 |
Stainless Steel 304 |
| M2.5x6 BHCS |
10 |
Stainless Steel 304 |
| M3x6 BHCS |
15 |
Stainless Steel 304 |
| M3x8 BHCS |
220 |
Stainless Steel 304 |
| M3x12 BHCS |
33 |
Stainless Steel 304 |
| M3x20 BHCS |
23 |
Stainless Steel 304 |
| M3x25 BHCS |
21 |
Stainless Steel 304 |
| M5x16 BHCS |
12 |
Stainless Steel 304 |
| M2x6 SHCS |
115 |
Stainless Steel 304 |
| M2x12 SHCS |
15 |
Stainless Steel 304 |
| M3x16 SHCS |
13 |
Stainless Steel 304 |
| M3x20 SHCS |
9 |
Stainless Steel 304 |
| M3x25 SHCS |
13 |
Stainless Steel 304 |
| M3x30 SHCS |
10 |
Stainless Steel 304 |
| M3x35 SHCS |
35 |
Stainless Steel 304 |
| M3x40 SHCS |
15 |
Stainless Steel 304 |
| M4x8 SHCS |
8 |
Stainless Steel 304 |
| M2 nut |
100 |
Stainless Steel 304 |
| M3 nut |
180 |
Stainless Steel 304 |
| M5 nut |
10 |
Stainless Steel 304 |
| M3x7x0.5 shim/washer |
45 |
Stainless Steel 304 |
| M4 Knurled Nut |
5 |
|
