Description
West3D is bringing it's storied Best Damn Fastener "BDF" kits to support the Positron!
This fastener kit comes with all the fasteners (and extras of each in case a the screw monster eats one) you could need for your Positron build. If you want the best damn fastener ("BDF") kit on the market, that won't make that beast of a printer you're building cry when its covered in rust, this is the kit you need. We have tested these fasteners against other suppliers, and even other sellers and can tell you definitively this is the best, and most complete kit on the market.
Below are a list of parts included, their quantities and associated material.
| Description | Quantity | Material |
| M6x14 thumbscrew 19mm head diameter | 2 | |
| M5 washer | 4 | ss304 |
| M6 nut | 4 | ss304 |
| M4 nut | 10 | ss304 |
| M4x10 Buttonhead | 15 | ss304 |
| M4x8 buttonhead | 4 | ss304 |
| M3x6 buttonhead | 15 | ss304 |
| M3x20 Buttonhead | 4 | ss304 |
| M3x14 Buttonhead | 4 | ss304 |
| M3x10 Buttonhead | 18 | ss304 |
| M3x8 Buttonhead | 15 | ss304 |
| M3x25 buttonhead | 6 | ss304 |
| M3x12 Buttonhead | 8 | ss304 |
| M3 nut 2.4mm | 42 | ss304 |
| M3 Washer | 15 | ss304 |
| M3x14 Waferhead | 20 | ss304 |
| M3x12 Waferhead | 4 | ss304 |
| M3x12 Flathead | 12 | ss304 |
| M3x18 flathead | 12 | ss304 |
| M3x10 Flathead | 3 | ss304 |
| M3x6 Flathead | 4 | ss304 |
| M3x23 Flathead | 4 | ss304 |
| M3 Nylock Nut | 4 | ss304 |
| M2.5x8 Flat head | 4 | ss304 |
| M2x10 Buttonhead | 7 | ss304 |
| M3x8 Sockethed | 8 | ss304 |
| M3x30 Sockethead | 4 | ss304 |
| M3x20 Sockethead | 10 | ss304 |
| M3x6 threaded insert | 8 | brass |
| HNTT5-3 T nut | 8 | nickel |
For more information check out the Positron site.