Mini-Fridge (Clicky-Clack) Door Kit for Voron V0.2 (LDO) - by TheVoronModder, Presented by West3D - West3D 3D Printing Supplies - LDO Motors
Roll over image to zoom in Click on image to zoom
Mini-Fridge (Clicky-Clack) Door Kit for Voron V0.2 (LDO) - by TheVoronModder, Presented by West3D - West3D 3D Printing Supplies - LDO Motors

Mini-Fridge (Clicky-Clack) Door Kit for Voron V0.2 (LDO) - by TheVoronModder, Presented by West3D

LDO MotorsSKU: LDO1918
Color: Black
Price:
$55.00

Customer Reviews

Based on 5 reviews
40%
(2)
40%
(2)
20%
(1)
0%
(0)
0%
(0)
K
K.D.
Fun improvement over stock door!

Overall the hardware quality is solid and very well put together. The only real complaints come from some of the documentation not being clear (primarily around the alternative models you can print), and a tolerance issue with the tapped holes on the frame as another reviewer mentioned.

However, despite these issues, it is a great mod to install. The door is significantly more secure than the stock door assembly (which makes sealing the printer a lot easier), and it is a lot of fun to swing close the door and hear the latch click into place

K
Kyle Goerlitz
Extrusion screws too long or tapped holes too shallow.

Going off the exploded view on the github page it looks like the 4 m3x16's are what hold the door frame together. They are about 5 mm too long. Lets say 6mm so we can assume its m3x10's. Either I'm doing something wrong or the kit was shipped with the wrong screws/extrusions not tapped deep enough. I'll just use screws I have on hand but man is that a bummer.

C
Chris Phillips
Good kit, models need improvement

The Parts included with the kit are fine, same quality extrusions as the V0 kit from LDO. The models for the printed parts leave room for improvement. Tolerances are a bit out of whack, I needed to make some changes to get them to fit properly and get a decent seal on the foam.

12

Description

Mini-Fridge Door Kit designed by TheVoronModder and inspired by Whoppingpochard's Clicky-Clack doors for V2 and Trident. This is a great one piece door makes for smooth and satisfying opening and closing (and clicking!) with nice sound.

This kit comes with a premium Cast Acrylic front panel and all the extrusions and hardware required (no printed parts). Please note, this requires the 100mm extrusions standard on an LDO V0.2 Kit.

Please note - because extrusions were anodized in a different batch than your LDO printer kit there might be a slight variation between color. This is true for all LDO Mini-Fridge Door Kits sold.

The purchase of this item helps support the designer of this mod. Thank you for your contribution to this community.

 

For more information please see the GitHub (including STL files)

You may also like

Recently viewed