Phaetus neXt G Fiber Extreme Gradient Drop Effect Hotend (NeXtG) - West3D 3D Printing Supplies - Phaetus
Roll over image to zoom in Click on image to zoom
Phaetus neXt G Fiber Extreme Gradient Drop Effect Hotend (NeXtG) - West3D 3D Printing Supplies - Phaetus

Phaetus neXt G Fiber Extreme Gradient Drop Effect Hotend (NeXtG)

PhaetusSKU: PHA1955
Price:
$156.00

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
E
Erik
Impressive retractions

I tend to stick with a 0.40 mm nozzle. My machine prints at 250 mm/s & 4000 mm/s2. At these flow rates I do not tend to exceed 24 mm/s3. So I did not install the high flow extender. Best decision ever. The retractions are fantastic. 0.50 mm with PLA on a standard V6 nozzle. No oozing/leaking. Only downside was the kinematic coupling combined with the 4 screw mounting pattern limit the number of positions that the cables route out and the steel stiffener bundle with cables as strain relief press down on my fan duct. I will need to re-design that to be compatible. The silicone boot is too thick at the nozzle making it necessary to remove the silicone before removing the nozzle - so no simple one handed nozzle change as claimed by the manufacturer. Doesn't matter - I still prefer this over my prior Rapido 2.0. I paired it with a Diamondback nozzle so I wouldn't ever really need to change the nozzle. Now I am set up for abrasives with glass/carbon fillers, and can print PLA/PET/TPU just as easily with no hardware changes. Huge fan of this. Glad the Rapido was out of stock when I went to purchase so I ended up with it.

User picture
N
Nathan Caldwell

Only gotten to do 2 prints so far but its so smooth and really good detail.

Description

Ultra High Flow rate

With a new heater and hotend design the neXt G was designed to achieve higher flow rates. Utilizing the ultra-high flow nut adapter, the melt zone can be further extended to achieve a maximum printing flow rate of up to 45mm3/s.

Rigid Kinematic Coupling System

The kinematic coupling system of the neXt G hotend ensures that your heater block is super rigid, while significantly limiting the heat transfer to the heatsink. This rigid structure protects the heatbreak from bending if your bed leveling fails. This rigid structure protects the heatbreak when the nozzle scrapes over a warped print. One-handed nozzle changes are possible and even if the nozzle is tightened too thoroughly the rigid structure will protect your heatbreak.

V6 Nozzle Compatibility

A major request for the neXt G hotend was the compatibility with the V6 nozzle system. You can now use V6 nozzles on the neXt G hotend to ensures freedom of choice on nozzles.

Same Footprint As A Dragon Hotend

The neXt G was designed to have the same dimensions as the Dragon hotend which makes it compatible to the big repository of Dragon hotend attachment systems (e.g. Voron, Creality etc.). With the Groove Mount adaptor, it can also be used on the Prusa printers (e.g Mk2, Mk3 etc.)

New Ceramic Heater

The neXt G hotend uses an efficient ceramic heater plate which is more cost effective and easier to maintain than a ceramic ring heater

  • Color: Black
  • Thermistor: PT1000
  • Heating Temp: 320°C+
  • Heatbreak: RCC Coated All Metal
  • Heatbreak Lifespan: Continuous Printing ~100kg of filament
  • Nozzle: Hardened Steel Nozzle
  • Features/Advantages
    • Ultra high flow rate
    • Rigid kinematic coupling system
    • High compatibility
    • New ceramic heater
  • Compatible Filament: PET-CF, PET-GF, PAHT-CF, PAHT-GF, NexPA-CF25, NexPA-GF25, S-PAHT, S-Multi

Check out our Undertaker if you want the best.

You may also like

Recently viewed