AMBROSIA PC-ABS Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools Premium 3D Printing Filament House Polycarbonate ABS

AMBROSIA FILAMENTSKU: AmbrosiaPCABS-BLK

Color: Black
Price:
Sale price€23,95

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
B
Bryce Ragatz
Solid filament

Prints similarly to plain ABS that I have worked with in the past. With a well calibrated VORON 2.4, printed without much fuss. Fumes are a bit more punchy than with some other ABS, not an issue if the enclosure stays closed a little bit longer w/ a nevermore carbon filter running. Prints are strong, and the layer lines are nicely concealed at a distance by the glitter effect. Would recommend.

I did have one strange, random break within the filament, which would have been a potential issue if I were not running with a filament sensor.

Description

Ambrosia Filament's line of Polycarbonate blend filament are designed to be printable without sacrifice. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool. 

Polycarbonate filament requires a heated bed, chamber and printing at higher temperatures than other common filaments.

Feed your Printer the Filament of the Gods.

PC-ABS (polycarbonate + acrylonitrile butadiene styrene) combines advantages of PC filament with easier printing. The filament both provides better mechanical properties and heat resistance than ABS with printability only marginally tougher. 

  • Arrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.
  • Derived from 100% Virgin (Grade-A) non-toxic pellets
  • Diameter: 1.75mm (+/-0.03mm)
  • Filament Net Weight: 1KG
  • Spool Weight: 

The glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, we recommend printing a spool clip (Here).

Check out our other lines of Ambrosia Filament!

 ASA ASA-CF ASA Sparkle ABS / ABS+ PETG PLA PC-ABS PC-CF TPU

 

Ambrosia Filament's Recommended Print Settings for our PC-ABS filament:

Attribute Accepted Value(s) [Our Recommended Value]
Extruder Temperature 250-280 Degrees Celsius [270]
Heated Bed 100-115 Degrees Celsius [110]
Build Surface PEA, PEI, Buildtak, or similar surface [Smooth PEI or PEA with adhesive]
Cooling Fan 0-70% range varies by cooling capabilities
Environmental Temperatures 40-120C [60C]
Soluble Support Materials HIPS or other Water Soluble Support Material


Technical Specifications for our PC-ABS Filament:

 Physical Properties Test Methodology Values
Density ISO1183 1.14-1.15g/cm3
Melt Flow Rate (250C/2.16KG) ISO 1133 19-22g/10min
Moisture Absorption (23C/24h) ISO 62 <0.8%
Mechanical Properties Test Methodology Values
Tensile Strength ISO 527 43.5-45.5
Elongation at break ISO 527 24-26%
Flexural Modulus ISO 527 800-950Mpa
Flexural Strength ISO 178 71.5-74.5Mpa
Impact Strength ISO 180 43.5-44.5KJ/m2
Thermal Dynamic Properties Test Methodology Values
HDT@ 0.455 MPa(66 psi) ISO 75 123C 

Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant. 

Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.

You may also like

Recently viewed