AMBROSIA PETG Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools Premium 3D Printing Filament

Feed your Printer the Filament of the Gods.

Derived from 100% Virgin Grade-A Non-Toxic pellets. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool. 

PETG (and PETG+) is a great build material for #D Printing made from the same type of plastics used in plastic bottles. It is one of the most popular 3D printing filaments and has high impact strength, low haze (also can print true clear) and is an easy material to print with. Overall PETG can survive heated elements more than PLA, and is a great 'graduating' material from PLA. While not explicitly required, a heated bed is highly recommended.

• Arrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.
• Derived from 100% Virgin (Grade-A) non-toxic pellets
• Diameter: 1.75mm (+/-0.03mm)
• Filament Net Weight: 1KG
• Spool Weight: 

The glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, we recommend printing a spool clip (here).

Check out our other lines of Ambrosia Filament!

ASA	ASA-CF	ASA Sparkle	ASA Dolos	ABS+	PETG	PLA
PLA Dolos	PC-ABS	PC-CF	TPU	ABS Matte	ASA-GF

 

Ambrosia Filament's Recommended Print Settings for our PETG filament:

Attribute	Accepted Value(s) [Our Recommended Value]
Extruder Temperature	225-260 Degrees Celsius [250]
Heated Bed	65-80C Degrees Celsius [80]
Build Surface	PEI, Glass, Buildtak, or similar surface [Textured PEI] - use separating layer if printing on smooth PEI!
Cooling Fan	0-70% range varies by cooling capabilities
Environmental Temperatures	15-50C [30C]
Soluble Support Materials

Technical Specifications for our ASA Filament:

Physical Properties	Test Methodology	Values
Density	ISO1183	1.27-1.28 g/cm^3
Melt Flow Rate (250C/2.16KG)	ISO 1133	8-12 g/10min
Mechanical Properties	Test Methodology	Values
Tensile Strength	ISO 527	41-45 Mpa
Elongation at break	ISO 527	10-12%
Flexural Modulus	ISO 527	1400-1500 Mpa
Flexural Strength	ISO 178	64-66 Mpa
Impact Strength	ISO 180	5-6 KJ/m^2
Thermal Dynamic Properties	Test Methodology	Values
HDT@ 0.455 MPa(66 psi)	ISO 75	68C
Continuous Use Temperature	IEC 60216	65C

Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant. 

Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.