AMBROSIA TPU 95 Filament of the Gods - 1KG Cardboard Spools Premium 3D Printing Filament TPU95

 

Ambrosia Filament's line of TPU95 (Thermoplastic Polyurethane with shore hardness of 95A) is a rubber like material that offers flexibility and incredible layer adhesion - allowing you to use for both industrial and hobby based activities. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool. Free of additives, this filament prints like butter.

Feed your Printer the Filament of the Gods.

TPU is a wonderful printing material if you're looking for something durable and flexible. We recommend printing TPU generally at consistent speed and temperature on a heated textured bed. 

• Arrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.
• Diameter: 1.75mm (+/-0.03mm)
• Filament Net Weight: 1KG
• Spool Weight: 

The glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, we recommend printing a spool clip (Here).

Check out our other lines of Ambrosia Filament!

ASA	ASA-CF	ASA Sparkle	ASA Dolos	ABS / ABS+	PETG	PLA
PLA Dolos	PC-ABS	PC-CF	TPU

 

Ambrosia Filament's Recommended Print Settings for our TPU filament:

Attribute	Accepted Value(s) [Our Recommended Value]
Extruder Temperature	190-220 Degrees Celsius [210]
Heated Bed	50-65 Degrees Celsius [60]
Build Surface	Textured PEI or other surface with with separation layer
Cooling Fan	0-70% range varies by cooling capabilities
Environmental Temperatures	40-80C [35C]

Technical Specifications for our TPU Filament:

Physical Properties	Test Methodology	Values
Density	ISO 1183	12.2-1.25g/cm3
Melt Flow Rate (250C/2.16KG)	ISO 1133	6-10g/10min
Moisture Absorption	ISO 62	<0.5%
Mechanical Properties	Test Methodology	Values
Tensile Strength	ISO 527	27-28Mpa
Elongation at break	ISO 527	800-1000%
Flexural Modulus	ISO 527	6-7Mpa
Flexural Strength	ISO 178	7-9Mpa
Impact Strength	ISO 180	NB
Thermal Dynamic Properties	Test Methodology	Values
HDT@ 0.455 MPa(66 psi)	ISO 75	95C

 

Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant. 

Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.