Carbon-Fiber / Black PEI Performance Double Sided Flex Plates with High-Temp Magnetic Backing

West3D PrintingSKU: WES1411

Style: Double-Sided Black Carbon Fiber / Black Smooth PEI
Size: 355x355mm (For 350mm Build Plates)
Price:
Sale price$77.99

Customer Reviews

Based on 5 reviews
40%
(2)
20%
(1)
40%
(2)
0%
(0)
0%
(0)
C
CP
Not great for ASA

Fine for low bed temp filaments but problematic for ASA. The smooth PEI side sticks well, however it ends up peeling off the steel as the part warps. CF side leads to curling edges on parts.

J
Javier Escobar

Works awesome

F
Fletcher Almond
"Mostly" Amazing

The smooth side PEI is one of the best plates to print on! Everything sticks and stays stuck down throughout a multiday print. Then pop right off after some cooldown and flex.

The CF side is a different story. Without any form of adhesive, nothing sticks to this plate material. And because of that, the CF pattern barely transfers onto the bottom of the print. At least it looks good for videos.

Description

Not many can say they have more selection than West3D, build surfaces is no exception. If you're not finding what you're looking for here, check our our other Flexible Build Surface Options:
West3D's own double sided sprint steel sheet with Carbon Fiber texture and Black smooth PEI with 3M magnetic Base and adhesive backing (468MP 200MP Adhesive). Magnet and adhesive is rated for up to 204C for short periods and 148C over long term, well over standard consumer 3D printing applications. Our flex steel sheets are .5mm thick without the PEI coating, and approximately 1mm thick as a double sided print surface.
Because convenience is sometimes having more, instead of just having one print surface we offer these double sided, one with our performance black PEI and one with the unique and beautiful carbon fiber texture.

Like our other flex plates these plate are oversized to make removing and fitting to the build plate easy, and features options for either plain or logo'd on the smooth side. 
Note: When using PETG on the smooth side it will stick like crazy, use a separating agent like a glue stick, not doing so risks damaging or even peeling off the film. 
 
Small impressions may occur when printing on the smooth side, these will diminish when re-heated, we have seen no adverse impact on our prints. 
For Voron Sizes:
For 350mm builds order a 355mm
For 300mm builds order a 305mm
For 250mm builds order a 255mm
For V0.1 builds order a 125mm

We have our very own PNG for our logo build plates for use in your favorite slicer, thanks Kyleisah#2433! 
355/305/255mm
*PLEASE NOTE: This product is not affiliated or endorsed by Voron Design.

You may also like

Recently viewed