AMBROSIA ASA-GF Glass Filled ASA Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools Premium 3D Printing Filament

This filament is highly abrasive, we strongly recommend printing with Tungsten Carbide Nozzle like the Undertaker

Ambrosia Filament's line of ASA-GF filament is derived from 100% Virgin Grade-A Non-Toxic pellets and long chopped Glass Fiber. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool. Free of additives, this filament prints like butter.

Feed your Printer the Filament of the Gods.

ASA is the natural successor to ABS and is great for both mechanical, functional or decorative parts. It prints well, with less warping than some other filaments, however it is highly encouraged to use an enclosure. A heated bed is required.ASA filament has high strength, impact and weather resistance (including UV), and can withstand higher temperatures than many common filaments (e.g. PLA/PETG). 

Adding chopped Glass Fiber to ASA increases its stiffness, toughness, strength and heat resistance and is an excellent choice for professional parts.

• Arrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.
• Derived from 100% Virgin (Grade-A) non-toxic pellets
• Glass Fiber Strands
• Diameter: 1.75mm (+/-0.03mm)
• Filament Net Weight: 1KG
• Spool Weight: 130g

The glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, we recommend printing a spool clip (Here).

Check out our other lines of Ambrosia Filament!

ASA	ASA-CF	ASA Sparkle	ASA Dolos	ABS / ABS+	PETG	PLA
PLA Dolos	PC-ABS	PC-CF	TPU

 

 

Ambrosia Filament's Recommended Print Settings for our ASA filament:

Attribute	Accepted Value(s) [Our Recommended Value]
Extruder Temperature	250-280 Degrees Celsius [270]
Heated Bed	100-120 Degrees Celsius [110]
Build Surface	PEI, Buildtak, or similar surface [Textured PEI]
Cooling Fan	0-70% range varies by cooling capabilities
Environmental Temperatures	40-120C [45C]
Soluble Support Materials	HIPS

Technical Specifications for our ASA-GF Filament:

Physical Properties	Test Methodology	Values
Density	ISO1183	TBD
Melt Flow Rate (250C/2.16KG)	ISO 1133	TBD
Mechanical Properties	Test Methodology	Values
Tensile Strength	ISO 527	TBD
Elongation at break	ISO 527	TBD
Flexural Modulus	ISO 527	TBD
Flexural Strength	ISO 178	TBD
Impact Strength	ISO 180	TBD
Thermal Dynamic Properties	Test Methodology	Values
HDT@ 0.455 MPa(66 psi)	ISO 75	88C+ (TBD)

 

Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant. 

Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Glass Fiber filaments have increased risk of use and should not be sanded or used without proper equipment. Handle with care, using appropriate tools and protective wear (e.g. gloves) when handling. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.