Omron TL-Q5MC2-Z NPN NC Inductive Probe


Sale price$14.99

Customer Reviews

Based on 1 review
Good shit main

Built a Voron 2.4r4 with some amazon kits for 2.4r2 and 2.4 and luckily West3d had the stuff i needed to improvise enough to get it to work. I wish some of the kits and harnesses would specify which revision they were for but other than that the site kicks ass. Checkout is easier than other sites. Also the sticker and the sucker they include in every package, even if it's only a 5 dollar order. LOVE THE SUCKER!!!!!


Compatible with Voron printers (V1, V2), and others to support bed leveling. This is "B" stock Omron Probe which saves you a considerable money over retail but works just as well. 


This probe is the sourcing guide listed product. It is a better alternative to the PL-08N if you are doing the MGN12 Mod, it is also less likely to melt.

Sensing head size 17 mm x 17 mm x 28 mm
Type Square type, Unshielded
Power source DC Three-wires models
Sensing distance 5 mm ±10%
Setting distance 0 to 4 mm
Differential distance 10% max. of sensing distance
Sensing object Ferrous metal (Sensitivity lowers with non-ferrous metals.)
Standard sensing object Iron 15 x 15 x 1 mm
Response frequency 500 Hz (Average value)
Response time 2 ms max.
Power supply voltage 12 to 24 VDC ripple (p-p) 10% max.
Operating voltage range 10 to 30 VDC
Current consumption at 24 VDC: 10 mA max.
Control output (Output type) NPN open collector
Control output (Switching capacity) 50 mA max. (30 VDC max.)
Control output (Residual voltage) 1 V max. (Load current 50 mA with cable length of 2 m)
Indicator Detection indicator (red)
Operation mode NO
Protective circuit Reverse polarity protection
Surge suppressor
Ambient temperature (Operating) -25 to 70 ℃
Ambient temperature (Storage) -25 to 70 ℃
Ambient humidity (Operating) 35 to 95% RH
Ambient humidity (Storage) 35 to 95% RH
Temperature influence ±20% max. of sensing distance at 23 ℃ in the temperature range of −25 to 70 ℃
Voltage influence ±2.5% max. of sensing distance at rated voltage in the rated voltage ±10% range
Insulation resistance Between charged parts and the case: 5 MΩ min. (at 500 VDC)
Dielectric strength Between charged parts and the case: 500 VAC 50/60 Hz 1 min
Vibration resistance Destruction: 10 to 55 Hz, 1.5 mm double amplitude each in X, Y, and Z directions for 2 h
Shock resistance Destruction: 200 m/s2 10 times each in X, Y, and Z directions
Degree of protection IEC: IP67
Connection method Pre-wired models (2 m)
Weight Package: Approx. 90 g
Material Case: Heat-resistant ABS resin
Sensing surface: Heat-resistant ABS resin

You may also like

Recently viewed