Description
West3D's Stainless Steel Fastener kit for the Switchwire comes with all the fasteners (and extras of each in case a the screw monster eats one) you could need for your build. If you want the best damn fastener ("BDF") kit on the market, that won't make that beast of a printer you're building cry when its covered in rust, this is the kit you need. Please note, the spacers are not listed in the photo but are included.
If you also need a hex key set, we've got you covered. See our set here.
Please follow recommendations for the best threadlocker application for your use (Loctite® Threadlocker Blue 242 is what we recommend).
Below are a list of parts included, their quantities and associated material.
| Description | BOM Quantity | BDF Quantity | Material |
| M5x40 SHCS | 6 | 8 | Stainless Steel 304 |
| M5x30 BHCS | 5 | 8 | Stainless Steel 304 |
| M5x16 BHCS | 12 | 15 | Stainless Steel 304 |
| M5x10 BHCS | 50 | 55 | Stainless Steel 304 |
| M5 Roll-in T-nut | 12 | 15 | Nickel Plated Steel |
| M3x8 SHCS | 66 | 72 | Stainless Steel 304 |
| M3x6 FHCS | 16 | 20 | Stainless Steel 304 |
| M3x6 BHCS | 6 | 8 | Stainless Steel 304 |
| M3x40 SHCS | 7 | 9 | Stainless Steel 304 |
| M3x30 SHCS | 28 | 32 | Stainless Steel 304 |
| M3x20 SHCS | 3 | 5 | Stainless Steel 304 |
| M3x16 SHCS | 12 | 15 | Stainless Steel 304 |
| M3x12 SHCS | 12 | 15 | Stainless Steel 304 |
| M3x12 FHCS | 9 | 12 | Stainless Steel 304 |
| M3 Threaded Insert | 54 | 58 | Brass |
| M3 Roll-in T-nut | 13 | 16 | Nickel Plated Steel |
| M3 Hexnut | 3 | 5 | Stainless Steel 304 |
| M2x10 Self-Tapping Screw | 8 | 12 | Stainless Steel 304 |
| M8x16 BHCS | 8 | 10 | Stainless Steel 304 |
| M4x8 BHCS | 4 | 6 | Stainless Steel 304 |
| M3x25 SHCS | 2 | 3 | Stainless Steel 304 |
| 6x6x3 Spacer | 9 | 10 | Stainless Steel 304 |
| 5x10x1 Shim Ring | 19 | 22 | Stainless Steel 304 |
| M3 T-Nut for 3030 Extrusions | 12 | 14 | Nickel Plated Steel |
| M5 T-Nut for 3030 Extrusions | 52 | 60 | Nickel Plated Steel |