AMBROSIA PC-CF Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools Premium 3D Printing Filament House Polycarbonate CF PCCF

This filament is highly abrasive, we strongly recommend printing with Tungsten Carbide Nozzle like the Undertaker

Ambrosia Filament's line of Polycarbonate Carbon Fiber blend of filament is designed to be printable without sacrifice. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool. 

Polycarbonate filament requires a heated bed, chamber and printing at higher temperatures than other common filaments.

Feed your Printer the Filament of the Gods.

PCCF (polycarbonate + carbon fiber) combines advantages of PC filament with easier printing. This filament includes a blend of approximately 10% other material to promote a better printing experience without sacrificing the properties of PC or CF. The filament both provides better heat resistance, strength and toughness than ABS or other common filaments with printability only being marginally tougher. 

• Arrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.
• Diameter: 1.75mm (+/-0.03mm)
• Filament Net Weight: 1KG
• Spool Weight: 

The glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, we recommend printing a spool clip (Here).

Check out our other lines of Ambrosia Filament!

ASA

ASA-CF

ASA Sparkle

ABS / ABS+

PETG

PLA

PC-ABS

PC-CF

TPU

 

Ambrosia Filament's Recommended Print Settings for our PC-CF filament:

Attribute	Accepted Value(s) [Our Recommended Value]
Extruder Temperature	250-290 Degrees Celsius [270]
Heated Bed	100-115 Degrees Celsius [110]
Build Surface	PEA, PEI, Buildtak, or similar surface [Smooth PEI or PEA with adhesive]
Cooling Fan	0-70% range varies by cooling capabilities
Environmental Temperatures	40-120C [60C]
Soluble Support Materials	HIPS or other Water Soluble Support Material

Technical Specifications for our PCCF Filament:

Physical Properties	Test Methodology	Values
Density	ISO1183	TBD
Melt Flow Rate (250C/2.16KG)	ISO 1133	TBD
Moisture Absorption (23C/24h)	ISO 62	TBD
Mechanical Properties	Test Methodology	Values
Tensile Strength	ISO 527	TBD
Elongation at break	ISO 527	TBD
Flexural Modulus	ISO 527	TBD
Flexural Strength	ISO 178	TBD
Impact Strength	ISO 180	TBD
Thermal Dynamic Properties	Test Methodology	Values
HDT@ 0.455 MPa(66 psi)	ISO 75	TBD

Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant. 

Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament.

CARBON FIBER FILAMENTS HAVE INCREASED RISK OF USE AND SHOULD NOT BE SANDED OR USED WITHOUT PROPER EQUIPMENT. HANDLE WITH CARE, USING APPROPRIATE TOOLS AND PROTECTIVE WEAR (E.G. GLOVES) WHEN HANDLING. ONLY USE IN A WELL VENTILATED AREA, WITH PROPER RESPIRATION EQUIPMENT.

Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.